|
|
Machine, Tools & Components
|
Suppliers Directory
|
EUROTHERM DEL INDIA
| | Address : |
152, DEVELOPED PLOTS ESTATE, PERUNGUDI |
| Telephone : |
044 4961129 |
| Fax : |
044 4961831 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
MELT PRESSURE CONTROL SYSTEM - EUROTHERM DEL INDIA HAS ANNOUNCED A NEW MEMBER OF THE SERIES 2000 FAMILY OF CONTROLLERS, THE MODEL 2604 (1/4 DIN) HIGH STABILITY PRESSURE CONTROLLER AND THE 2704 (1/4 DIN, GRAPHICAL DISPLAY INSTRUMENT) AND ARE PERFECT FOR PLASTIC MELT PRESSURE APPLICATIONS. STRAIN GAUGE INPUTS CAN BE ENERGIZED FROM AN INTERNAL 5 OR 10-VOLT TRANSDUCER EXCITATION DC SUPPLY ON THE 2604 OR 2704. THIS HIGH SPEED, 5-DIGIT CONTROLLER IS EQUIPPED WITH A PRECISION MELT PRESSURE CONTROL ALGORITHM AND INCLUDES AN AUTOMATIC CALIBRATION ROUTINE TO REMOVE ZERO AND SPAN OFFSETS. THE 2604 AND 2704 ARE AVAILABLE WITH MODBUS RTU OR PROFIBUS DP SLAVE COMMUNICATIONS NAD MAKE IDEAL CONTROLLERS FOR CONNECTION TO PLC OR PC BASED SYSTEMS USING PROFIBUS DP OR MODBUS RTU OR OPC IN WHICH THE SECURITY AND HIGH ACCURACY OF AN INDEPENDENT MELT PRESSURE CONTROLLER IS REQUIRED AND CAN SUPPORT UP TO THREE LOOPS OF CONTROL. THIS PERMITS A VARIETY OF CONTROL STRATEGIES THAT ARE ALL CAPABLE OF BEING CREATED AND "CLONED" WITH THE TOOLS SOFTWARE PACKAGE WITH POSSIBILITY OF LARGE COMBINATIONS. ALL PARAMETERS ARE AVAILABLE OVER THE COMMUNICATIONS INTERFACE THAT IS ACHIEVED EITHER VIA THE FRONT PANEL OR BY USING EUROTHERM CONTROLS' "TOOLS" CONFIGURATION SOFTWARE. SOFTWARE TOOLS ALSO SIMPLIFY PROFIBUS GSD FILE GENERATION AND RUN UNDER THE WINDOWS 95, WINDOWS 98 OR WINDOWSNT OPERATING SYSTEMS.
|
|
ELECTRODE MONITORING SYSTEM FOR GLASS FURNACE - EUROTHERM DEL INDIA OFFERS AN ELECTRODE MONITORING SYSTEM FOR GLASS FURNACES WITH INTERACTIVE TOUCH-SCREEN DISPLAY, DEVELOPED BY FIC (UK) LIMITED OF PENZANCE, THAT CONTINUOUSLY MONITORS AND DISPLAYS ELECTRODE PERFORMANCE, ALLOWING WEAR OR BREAKAGE TO BE PICKED UP EARLY ENOUGH TO AVOID REFRACTORY EROSION OR DAMAGE. THE HEART OF THE UNIT IS BASED ON EUROTHERM"S VERSATILE VISUAL SUPERVISOR CONTROL SYSTEM, PROVIDING A HIGH LEVEL OF OPERATOR INFORMATION, WITH TOUCH-SCREEN DISPLAY AND ALLOWS GLASS PRODUCTION PERSONNEL TO FULLY MONITOR AND DETERMINE THE STATE OF WEAR OF THE ELECTRODES AT ANY TIME DURING THE FURNACE CAMPAIGN. TAKING ADVANTAGE OF FLASH MEMORY, IT KEEPS A CONTINUOUS RECORD OF ELECTRODE VOLTAGE AND CURRENT, AND IS FULLY ALARMED TO ALERT OPERATORS OF ANY PROBLEMS DETECTED WITH THE ELECTRODES. SYSTEM VERSATILITY IS SUCH THAT ELECTRODE HOLDER TEMPERATURES ARE MONITORED AS WELL AS FURNACE VOLTAGE AND CURRENT PARAMETERS AND MEASUREMENT OF BOTH ELECTRODE AND FURNACE PARAMETERS IS HANDLED THROUGH AN ADJACENT EUROTHERM 2500 SYSTEM, WHICH PROVIDES HIGH PERFORMANCE, HIGH ACCURACY I/O ROUTING FROM FURNACE THERMOCOUPLES AS WELL AS ELECTRODE CURRENT AND VOLTAGE TRANSDUCERS AND INCORPORATES A NUMBER OF UNIQUE HARDWARE AND SOFTWARE INTERACTIONS THAT PROVIDE FAST, ACCURATE RESPONSE TIMES FOR ANALOGUE PROCESS CONTROL SYSTEMS OF THE EMU TYPE.
|
|
EUROTHERM'S PROCESS CONTROL SOLUTION - EUROTHERM'S NEW FAMILY OF INTEGRATED HARDWARE AND SOFTWARE SOLUTIONS FOR A WIDE RANGE OF PROCESSING INDUSTRIES AND APPLICATIONS IS EUROTHERMSUITE®, A COMPREHENSIVE SUITE OF PROVEN SOLUTIONS DEVELOPED OVER A LONG PERIOD OF TIME AND STEMMING FROM THE COMPANY'S TRACK RECORD OF CONTROL SYSTEMS DESIGN AND INTEGRATION AND ITS TOTAL FLEXIBILITY AND COMMON ARCHITECTURE, OFFERS THE CAPABILITY OF HANDLING THE LOCALISED CONTROL NEEDS OF PRODUCTION UNITS AND PLANTS, AS WELL AS THE INFORMATION NEEDS OF ENTERPRISE MANAGEMENT. IT CAN PROVIDE AN ALMOST INFINITE VARIETY OF TOTALLY INTEGRATED SYSTEMS, WHICH GROW WITH PLANT NEEDS AND INVESTMENT PROGRAMS AND CAN BE VIEWED AS HAVING FOUR LAYERS: UNIT, PLANT AND ENTERPRISE SOLUTIONS WITH ONE INTEGRATED DEVELOPMENT ENVIRONMENT, TOGETHER, THEY OFFER COMPLETE CONTROL OVER EVERY ASPECT OF A SYSTEM'S LIFECYCLE. MAJOR ADVANTAGES OF THE APPROACH INCLUDE A SINGLE POINT OF CONFIGURATION, CENTRAL RELATIONAL DATABASE, DATA IMPORT CAPABILITIES, PRE-BUILT FUNCTIONALITY AND WELL-PROVEN AUTOMATIC SYSTEM DESIGN CAPABILITIES. IN OPERATION, REAL TIME ACCESS TO PERFORMANCE MEASUREMENTS ALLOWS IMMEDIATE MANAGEMENT ACTION TO IMPROVE PLANT THROUGHPUT "ON LINE" AND ITS POWERFUL FEATURE CONTRIBUTES TO AN OUTSTANDING RANGE OF SOLUTIONS, WHICH ADDRESS THE NEEDS OF OPERATIONS, ENGINEERING, MAINTENANCE, FINANCIAL AND PLANT MANAGEMENT. AT THE DEVELOPMENT LEVEL, EUROTHERM PROJECT STUDIO IS A POWERFUL SUITE OF TOOLS AND FACILITIES DESIGNED TO CONFIGURE AND COMMISSION ALL EUROTHERM SUITE COMPONENTS. IT FACILITATES COST-EFFECTIVE SOLUTIONS CAN BE RAPIDLY PROVIDED TO CONTROL BASIC PLANT UNITS SUCH AS REACTORS, MIXERS, STERILISERS AND FURNACES AT UNIT LEVEL. THE PROCESS INTERFACES AVAILABLE PROVIDE HIGH-ACCURACY MEASUREMENT AND CONTROL, AND INCLUDE DISTRIBUTED AND MODULAR 1/0 WITH UNIVERSAL CONFIGURABLE INPUTS.
|
|
INNOVATIVE CONTROL CONCE - EUROTHERM'S MODEL 2500 DATA ACQUISITION AND MULTILOOP PID CONTROL UNIT IS A HIGH PERFORMANCE, HIGH ACCURACY, HIGH FUNCTIONALITY 1/0 SYSTEM THAT PROVIDES COST-EFFECTIVE ACCESS TO A WIDE RANGE OF ADVANCED FUNCTIONS WITH PID CONTROL WITH AUTO TUNING, CASCADE AND GAIN SCHEDULING, TOGETHER WITH MATHEMATICAL FUNCTIONS AND COMBINATIONAL LOGIC. THE DEVICE IS MOUNTED ON A DIN RAIL BASE AND TAKES PLUG-IN ANALOG/DIGITAL 1/0 MODULES AND IS DESIGNED TO BE USED WITH ANY DEVICE RUNNING A MODBUSTM RTU OR PROFIBUS DP MASTER COMMUNICATIONS INTERFACE, SUCH AS THE EUROTHERM VISUAL SUPERVISOR, PC BASED SCADA PACKAGES OR PLC'S. AND IS IDEAL FOR REMOTE 1/0, ALARM MONITORING, SIGNAL CONDITIONING, MULTI-LOOP PID, FURNACES, ENVIRONMENTAL CHAMBERS, BAKING CONVEYOR OVENS, PACKAGING LINES, CONVEYER FURNACES AND AS 1/0 RACKS FOR VARIOUS PROCESS APPLICATIONS WITH BENEFITS LIKE ADVANCED PID CONTROL, SINGLE LOOP INTEGRITY, PHYSICAL DISTRIBUTION, LOCAL PROCESSING, DIRECT INTERFACE TO TEMPERATURE SENSORS, PLUG-IN MODULES, EXPANDABILITY. EIGHT HIGH STABILITY PID BLOCKS PROVIDE AN EXTENSIVE RANGE OF CONTROL STRATEGIES. EACH PID BLOCK OFFERS ONE-SHOT AUTO TUNING TO OPTIMISE CONTROL PERFORMANCE WITHOUT THE NEED FOR SPECIALIST KNOWLEDGE AND EVERY PID BLOCK MAY BE A SINGLE PID, CASCADE, RATIO OR OVERRIDE CONTROLLER, EACH PROVIDING THE CHOICE OF ANALOG, TIME PROPORTIONAL OR VALVE POSITION OUTPUT. THE DISTRIBUTED ARCHITECTURE ALLOWS THE 2500 TO BE MOUNTED WHERE THE CONTROL ACTION IS REQUIRED, MINIMISING THE COST OF THE WIRING SINCE ONLY THE TWISTED PAIR COMMUNICATIONS CABLE IS TAKEN TO THE USER INTERFACE. THE 2500 MAY ALSO BE MOUNTED DIRECTLY ONTO THE MACHINE, SAVING THE COST OF CONTROL CUBICLES.
|
|
NEW BATCH MANAGEMENT SOFTWARE - EUROTHERM LIMITED HAS ANNOUNCED AN UPDATED AND IMPROVED VERSION OF ITS INNOVATIVE VISUAL SUPERVISOR MULTI-FUNCTION CONTROL AND DISPLAY VERSION 3.2, THAT OFFERS A NUMBER OF SIGNIFICANT ADDITIONS AND IMPROVEMENTS OVER PREVIOUS VERSIONS, INCLUDING POWERFUL NEW BATCH MANAGEMENT AND LOGGING FACILITIES. THE COMBINED PROCESS CONTROLLER, DATA LOGGER, SETPOINT PROGRAMMER AND INTERACTIVE TOUCH SCREEN DISPLAY HAS BEEN WIDELY SPECIFIED ACROSS A DIVERSE RANGE OF INDUSTRIES AND APPLICATIONS. THE NEW OPERATING SOFTWARE INCORPORATES AN OPTIONAL BATCH MANAGER APPLICATION, DESIGNED TO ALLOW AN OPERATOR TO CONTROL (I.E. LOAD, START, HOLD, RESTART, ABORT) A BATCH, AND MONITOR ITS PROGRESS FROM STANDARD DISPLAYS WHERE UP TO FOUR BATCHES CAN RUN SIMULTANEOUSLY. EACH BATCH BEING IDENTIFIED BY EITHER A UNIQUE NUMBER (AUTOMATICALLY GENERATED) OR A BATCH ID ENTERED BY THE OPERATOR AND CAN BE CONFIGURED TO INCLUDE UP TO SIX OPERATOR ENTRY FIELDS SUCH AS JOB NUMBER, CHARGE NUMBER, CUSTOMER NAME. THE APPLICATION CAN ALSO BE CONFIGURED TO AUTOMATICALLY START AND STOP BATCH LOGGING WHENEVER A BATCH PROCESS IS STARTED OR FINISHED AND A DETAILED BATCH LOG FILE IS CREATED AT THE END OF EACH BATCH WITH A UNIQUE ID. BESIDES LOGGING PROCESS VALUES, THE LOGGING FEATURE WITHIN BATCH MANAGER CAN BE CONFIGURED TO INCLUDE ALARM AND EVENT MESSAGES, AS WELL AS OPERATOR NOTES WITH FULL TIME/DATE INFORMATION ALSO OFFERING THE POSSIBILITY TO TRACK ANY CHANGES TO SPECIFIC PARAMETERS IN THE DATABASE MADE FROM USER SCREENS. THE BATCH LOG FILES ARE AVAILABLE IN A "TAMPER PROOF' FORMAT AND IS A VERY POWERFUL FEATURE FOR REGULATORY INDUSTRIES SUCH AS PHARMACEUTICAL, CHEMICAL, HEAT TREATMENT, ETC., AND WILL MEET THE REQUIREMENTS OF 2LCFRLL. ITS OTHER SYSTEM ENHANCEMENTS INCLUDE SUPPORT FOR BARCODE READERS AND MAGNETIC CARD SCANNERS. VERSION 3.2 CAN ALSO GENERATE AND DISPLAY CUSTOM DESIGNED "PANEL MESSAGES", REQUIRING AN OPERATOR RESPONSE VIA UP TO FOUR BUTTONS WITHIN THE PANEL DISPLAYED ON THE TOUCH SCREEN. VISUAL SUPERVISOR IS CAPABLE OF PERFORMING BOTH CONTINUOUS AND SEQUENTIAL CONTROL AND FEATURES COMPREHENSIVE ALARM AND EVENT MANAGEMENT, POWERFUL TRENDING, SETPOINT PROGRAMMING AND LOCAL DATA LOGGING FACILITIES AND CAN BE USED EITHER AS A STAND-ALONE SYSTEM, OR AS A BUILDING BLOCK WITHIN A LARGER SYSTEM. BECAUSE OF ITS OPEN NETWORK ARCHITECTURE, VISUAL SUPERVISOR MAY BE CONNECTED TO A WIDE RANGE OF PROCESS INTERFACE I/O MODULES, INCLUDING THOSE FROM EUTOTHERM'S 2500 SYSTEM AND OTHER THIRD PARTY DEVICES, SEPARATING THE PROCESSING FROM THE 1/0 HAS ALSO ALLOWED PHYSICAL DISTRIBUTION OF THE MODULES, WHICH SAVES ON WIRING COSTS. THE OPERATOR INTERACTS WITH VISUAL SUPERVISOR USING THE TOUCH-SCREEN, WHICH IS AVAILABLE IN BOTH STANDARD 1/4 VGA SIZE, OR AN EXCEPTIONALLY LARGE SVGA FORMAT. UP TO 99 USER-SCREENS CAN BE CONFIGURED BY UTILIZING THE USER-SCREEN EDITOR PROVIDED WITH PROJECT STUDIO, PART OF THE EUROTHERMSUITE® FAMILY OF INTEGRATED HARDWARE AND SOFTWARE SOLUTIONS AND THE USER-SCREEN EDITOR HAS A LIBRARY OF PRE-DEFINED GRAPHICAL OBJECTS, AND ANY USER- SCREEN OR OTHER PAGE MAY BE SELECTED AS THE 'HOME' SCREEN. A BUILT-IN TRENDING CAPABILITY ALLOWS TRENDING OF DIGITAL AND ANALOGUE VALUES, ALLOWING PROCESS TRENDS TO BE ACCESSED VIA GROUP DISPLAYS AND ITS TREND FUNCTIONALITY OFFERS BOTH ONLINE AND HISTORICAL TRENDS. PROGRAMS ARE CONFIGURED FROM A PC USING THE SETPOINT PROGRAMME EDITOR PROVIDED WITH PROJECT STUDIO.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Industrial Process Equipments & Accessories
|
| | | |
|
