|
|
Machine, Tools & Components
|
Suppliers Directory
|
HINDUSTAN ENGINEERING WORKS
| | Address : |
299 INDUSTRIAL AREA OPP MALL MANDI |
|
Email is not available |
| |
|
Products |
|
TOOL AND CUTTER GRINDER - TOOL AND CUTTER GRINDER IS YET ANOTHER INNOVATIVE PRODUCT FROM HIDUSTAN ENGINEERING WORKS. THIS IS A VERSATILE PRECISION MACHINE VERY MUCH CAPABLE OF PERFORMING A WIDE VARIETY OF GRINDING OPERATION. HAVING MODERN DESIGNS AND CONSPICUOUS FEATURES THEY ARE PERFECT FOR JOB SHOPS AND TOOL ROOM WHEREIN QUICK SET UP IS NEEDED FOR ECONOMICAL PRODUCTION. IN CONTRAST TO THE OLD METHOD OF SETTING THE FINGER REST BELOW OR ABOVE THE CENTRELINE BY CALCULATING AND REFERRING TO CHARTS, THE USE OF THE TILTING HEAD SIMPLIFIES THE OPERATION. IT HELPS IN SETTING THE CUTTING FACE ANGLES QUICKLY AND ACCURATELY. THE MACHINE CAN DO MOST OF THE TOOL GRINDING JOBS SUCH AS SHARPENING OF HOB CUTTERS, SHELL END MILL CUTTER,INVOLUTE GEAR CUTTER, SIDE AND FACE CUTTER, SLOTTING MILL, ANGLE CUTTER AND REAMERS, ETC. HOB CUTTER WITH SPIRAL HELIX CAN ALSO BE GROUND ON THIS MACHINE WITH THE HELP OF HOB GRINDING ATTACHMENT.
|
|
GEAR HOBBING MACHINE - INTRODUCED BY HINDUSTAN ENGINEERING THE MODEL V-300, GEAR HOBBING MACHINE IS DESIGNED FOR THE PRODUCTION OF PRECISION SPLINES, SPROCKETS, SPUR, HELICAL, WORM GEARS, RACHET WHEELS AND ANY OTHER FORM THAT CAN BE HOBBED. ITS BED AND COLUMN ARE OF CLOSE GRAIN CASTING AND ARE RIBBED WITH V-TYPE GUIDE WAYS. OF ALLOY STEELS ARE THE SHAFTS AND GEARS MADE OF. THE INDEXING WORM WHEEL IS OF HIGH-GRADE BRONZE MATERIAL. THE MACHINE IS RIGGED WITH DIFFERENTIAL MECHANISM FOR CUTTING HELICAL GEARS.
TO REMOVE BACKLASH BETWEEN THE INDEXING WORM AND WORM GEAR A PROVISION HAS BEEN MADE. SO ALSO BETWEEN FEED SCREW AND THE NUT OF THE HOB SLIDE. OIL RESERVOIRS ARE OFFERED IN THE MACHINE, WHICH ENSURES THOROUGH LUBRICATION OF GEARS AND BEARINGS. DIAMETER OF WORKTABLE IS 13". THE MAXIMUM DIAMETER OF HOB IS 3.5" AND MAXIMUM LENGTH OF HOB IS 5". THE MACHINE IS AVAILABLE WITH HOB SPEEDS 60, 75, 90, 120, 150, AND 180 IN RPM.
|
|
HEAVY DUTY CUTTING & CREASING MACHINE - INTRODUCED BY HINDUSTAN ENGINEERING WORKS THE HEAVY DUTY CUTTING & CREASING MACHINE IS DESIGNED TO HANDLE THE CUTTING, CREASING PLATENS DESIGNED TO HANDLE THE CUTTING, CREASING AND SOLID BOARD, CORRUGATED BOARD,EMBOSSING OF PAPER, MICRO FLUTE, RUBBER, LINOLEUM PLASTICS AND LEATHER USING A FLAT DIE.THE BED AND PLATEN OF THIS MACHINE IS MADE OF GRADED CASTING.THEY ARE ROBUST AND HIGH PRECISION MACHINES. THE MOTOR OPERATES A SOPHISTICATED TRANSMISSION SYSTEM AND THIS IN TURN OPERATES THE MACHINE BY MEANS OF AN ELECTROMAGNETIC CLUTCH AND BRAKE FOR INSTANT STOPPING. THE PRESSURE ADJUSTING SYSTEM PERMITS THE OPERATOR TO MAKE THE PRESSURE ADJUSTMENT WHILE THE OPEN DWELL TIME OF THE PLATEN IS VARIABLE. THE CONTROL PANEL FOR THE MACHINE IS LOCATED IN FRONT OF THE OPERATOR FROM WHICH POSITION ALL THE MACHINE FUNCTIONS ARE OFFERED. SPECIAL CARE HAS BEEN TAKEN TO ASSURE THAT ADEQUATE SAFETY SYSTEMS HAVE BEEN INSTALLED MAINLY IN THE CONTROL OF CLUTCH, FULL ELECTRICAL INTERLOCKING AND SAFETY GUARDS. THE MACHINES ARE SUPPLIED WITH CENTRAL LUBRICATION AND COMPLETE ELECTRICAL INSTALLATION INCLUDING A SHEET COUNTER. HEAVY-DUTY CUTTING AND CREASING MACHINES OF THE FOLLOWING WEIGHTS ARE ALSO AVAILABLE: 3.5 TON, 4.3 TON, 5.5 TON, 6.5 TON AND 10.4 TON. SPECIFICATIONS INCLUDE INSIDE CHASE: 20" X 26"; PLATEN SIZE: 23" X 29"; IMPR/HR: 1600; POWER REQUIRED: 3 HP; FLOOR SPACE: 55" X 50" AND WEIGHT APPROXIMATELY: 2.7 TONNES.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Machine, Tools & Components Products
|
| | | |
|
