|
|
Machine, Tools & Components
|
Suppliers Directory
|
REKHA ENGINEERING WORKS
| | Address : |
PLOT NO: 267/3, GIDC ESTATE PHASE-II, |
| Telephone : |
02752-241312243721 |
| Fax : |
91-2752- 243721 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
NORTON GEAR LATHE MACHINE - REKHA ENGINEERING WORKS PRESENTS NORTON GEAR LATHE MACHINES, MODELS C-1 AND C-2. ITS BED IS MADE FROM SPECIAL CLOSED GRAIN CAST IRON. THE SLIDE AND ALL WAYS ARE GROUND AND FLAME HARDENED. HEAD STOCK IS OF THE CONE PULLEY TYPE; MAIN SPINDLE IS GROUND BORED 1-3/8" RIGHT THROUGH FROM THE SOLID AND RUNS IN LARGE ADJUSTABLE TAPER ROLLER BEARINGS. ON THE REAR SIDE OF THE SPINDLE IN THE HEADSTOCK THE BACK GEAR IS FITTED AND IT CAN BE ENGAGED OR DISENGAGED BY MEANS OF A LEVER. FEED AND SCREW CUTTING REVERSE IS EASY FOR THE OPERATOR. ALL GEARS ARE GUARDED. FACE PLATES, ETC, FIT ON THE GROUND PORTION OF THE SPINDLE NOSE, WHICH IS OF THE THREADED TYPE. THE MOTOR TOGETHER WITH THE COUNTER IS ENCLOSED FULLY INSIDE THE LEG OF THE LATHE. BELT DRIVE TO SPINDLE ELIMINATES NOISE AND GEAR--VIBRATION. QUICK NORTON GEARBOX PROVIDES 45 FEEDS AND A VIDE RANGE OF THREADS METRIC AND WITH WORTH. IT IS FITTED ON THE FRONT WITH HAND CONTROL LEVER FOR SELECTING THE FEEDS AND SCREW CUTTING THREADS. THE LATHE ALSO HAS A LEAD SCREW.
|
|
HYDRAULIC CYLINDRICAL GRINDING MACHINE - HYDRAULIC CYLINDRICAL GRINDING MACHINE IS THE LATEST INNOVATIVE VENTURE FROM REKHA ENGINEERING WORKS. THE BED IS MADE OF HIGH-GRADE CAST IRON OFFERED WITH STRONG RIBS FOR RIGIDITY AND A LARGE INVERTED PRISMATIC GUIDE AND WIDE TRACK, FOR THE TABLE. ALL THE GUIDE-WAYS ARE CAREFULLY HAND SCRAPED TO ASSURE HIGH ACCURACY. OF TWO PARTS THE TABLE IS COMPOSED. THE UPPER TABLE CAN BE SWIVELLED AND SET EASILY ON EITHER SIDES BY MEANS OF SETSCREW AND SCALE. TABLE SLIDE IS HYDRAULICALLY OPERATED, AND CROSS SLIDE IS HYDRO-MECHANICALLY OPERATED. THE CUT IS TAKEN BY HAND TO AVOID ANY DAMAGE TO JOB AND GRINDING WHEEL. THE WORK HEAD IS SWIVELLING TYPE TO GRIND ANGULAR AS WELL AS CONICAL JOBS. IT IS BUILT FOR GRINDING BOTH WITH REVOLVING AND STATIONERY CENTRES. THE WORK HEAD CAN BE SWIVELLED UP TO 45° TOWARDS WHEEL AND AWAY FROM WHEEL. SPINDLE IS MADE FROM HIGH-GRADE CARBON ALLOY STEEL WITH MT-3 STANDARD.
|
|
CYLINDRICAL GRINDING MACHINES - REKHA ENGINEERING WORKS INTRODUCE HYDRAULIC CYLINDRICAL GRINDING MACHINES THAT ARE USED FOR EASY CYLINDRICAL PART GRINDING FWITHN CENTRE-TO-CENTRE AND LIVE CENTRES. LENGTH JOF GRINDING JOB ON DIFFERENT SIZE OF MACHINES CAN BE PROVIDE, WITH MAXIMUM GRANDING LENGTH OF MACHINES RANGING AT 300, 400, 600 AND 1000 MM IN DIFFERENT MODELS. ITS MAIN BODY IS MADE OF HIGH GRADE CAST IRON, PROVIDED WITH STRONG RIBS FOR RIGIDITY. ALL HAND-SCRAPPED TO ENSURE HIGH ACCURACY AND TABLE SLIDES ARE HYDRAULICALLY-OPERATED AND CROSS-SIDED. RAPID APPROACH CAN ALSO BE PROVIDED. WORKHEAD SPINDLES RUN WITH REVOLVING AND STATIONARY CENTRES. WHEEL SPINDLES RUN IN WHITE METAL BUSH BEARING AND AUTOMATIC LUBRUCATION IS PROVIDED BY SPLASH SYSTEMS. THE HYDRAULIC CYLINDRICAL GRINDING MACHINE ARE TESTED AS PER IS TEST CHART ANDIT GUARANTEE CONVEX ACCURACY IS WITHIN 10, ROUNDNESS ACCURACY IS AT 0.03 AND SURFACE FINISH WITHIN 0.4 TO 0.8 RA.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Machine, Tools & Components Products
|
| | | |
|
