|
|
Machine, Tools & Components
|
Suppliers Directory
|
TAPARIA MAGNETICS PVT.LIMITED
Mfrs. & Exp. Of Permanent, Electro & Electro Permanent Magnetic Systems.
| | Products : |
Magnets And Magnetic Systems. |
| Address : |
12/23/24, SARITA BUILDING,
PRABHAT INDUSTRIAL ESTATE,
BEFORE CHECK NAKA, DAHISAR (EAST),
|
| Telephone : |
91-22-2896496891-22-28979362 |
| Fax : |
91-22-28963741 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
MAGNETIC LIFTING DEVICE - 2 POLES - THESE ARE RECOMMENDED FOR USE WITH JOBS HAVING MINIMUM THICKNESS
AT AREA OF HOLDING AS MENTIONED BELOW. FOR 804 THICKNESS >12MM, FOR 807 THICKNESS >30MM. RECOMMENDED
HOLDING FORCE KG
100
1200,BR>1500
|
MULTI ANGLE CLAMPS - SUITABLE FOR BOTH FLAT AND ROUND WORK PIECES.
ANGLES : 45 AND 90 DEGREES
THESE ARE SUPPLIED IN STANDARD POST OFFICE RED GLOSSY COATED FINISH. ON SPECIAL REQUEST, THESE CAN BE SUPPLIED IN ANY OTHER FINISH
|
|
MAGNETIC HOLDER - THREE V SHAPED POLE SURFACES AND THREE FLAT POLE SURFACES. SUITABLE FOR ROUND AND FLAT WORK PIECES.
ANGLES : 45 AND 90 DEGREES
THESE ARE SUPPLIED IN STANDARD POPPY RED AND WRINKLE FINISH. ON SPECIAL REQUEST, THESE CAN BE SUPPLIED IN ANY FINISH.
|
|
OVERBAND MAGNETS - OVERBAND MAGNETS ARE USED FOR SEPERATION OR RECLAMATION OF FERROUS MATERIALS. THEY ARE USED ON CONVEYOR BELTS, CHUTES AND VIBRATORY SCREENS. ANY SIZE CAN BE MADE AS PER COSTOMERS REQUIREMENTS. SEPERATION CAN BE DONE FROM A DISTANCES OF 2.5CMS. TO 45CMS.
|
|
MAGNETIC PLATES - PERMANENT MAGNETIC PLATES ARE USED FOR SEPERATION OF TRAMP IRON FOUND IN TEA, TABACCO, COFFEE, COCOA, MILK POWDER, CHEMICALS, ETC. THEY ARE AVAILABLE IN BOTH FLAT AND CURVED SHAPES AND COULD BE INSTALLED EITHER ABOVE OR BELOW THE PASSAGE OF MATERIAL FLOW. THEY ARE PROVIDED WITH CLAMPS AND COULD BE LOCATED ON THE CONVEYOR CARRYING SUCH MATERIALS. IDEALLY, THEY ARE LOCATED ABOVE THE LAYER OF MATERIAL FLOW. THESE PLATES ARE CONSTRUCTED WITH HIGH ENERGY PERMANENT MAGNETS PLACED IN A MAGNETIC CIRCUIT. THEY ARE EXTENSIVELY USED IN CTC TEA MACHINERY AND IN BISCUIT STACKING MACHINES. THEY ARE AVAILABLE IN A RANGE OF SIZES. NON STANDARDS SIZES CAN BE MADE ON SPECIAL REQUEST.
|
|
HORSE SHOE MAGNETS - HORSE SHOE MAGNETS ARE WIDELY USED FOR SEPERATION OF TRAMP IRON (EG.PINS, NAILS, NUTS AND BOLTS) FOUND IN COTTON, CATTLE FEED, CERAMIC / REFRACTORY POWDER, PIGMENTS / DYES ETC. THEY COULD BE INSTALLED IN TEXTILE BLOWROOMS, PULVERIZERS, CONVEYORS / CHUTES EITHER ABOVE OR ALONG THE PASSAGE OF MATERIAL FLOW. THEY ARE U-SHAPED AND HAVE A PROVISION FOR CLAMPING WHEREVER REQUIRED. THEY ARE CONSTRUCTED WITH HIGH ENERGY PERMANENT MAGNETS WHICH RETAIN POWER LIFE LONG. THEIR OVERALL DIMENSIONS ARE 152 X 95 X 54 MM.
|
|
TEXTILE ROLLERS - TEXTILE ROLLERS ARE USED FOR BLOW ROOM MACHINES, FOR COLLECTING ALL TRAMP IRON LIKE NAILS, NUTS, BOLTS, ETC FOUND IN COTTON.
|
|
SHEET FLOATERS - THESE FLOATERS COME IN THREE CATEGORIES 975/1, 975/2, 975/3 AND COMES IN SIZES RANGING FROM 3.5 KG TO 11.0 KG. ITS SHEET THICKNESS VARIES FROM UNDER 0.3MM, 0.3 - 0.6MM AND 0.6MM TO 1.2 MM.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Machine, Tools & Components Products
|
| | | |
|
