|
|
Machine, Tools & Components
|
Suppliers Directory
|
TAEGU TEC INDIA LTD
| | Address : |
119 & 120 BOMMASANDRA INDUSTRIAL AREA PHASE 4 |
| Telephone : |
080-78329037832906 |
| Fax : |
91-80-7831869 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
ZERO MILL FOR CAST IROM MILLING - ZERO MILL WITH HEXAGONAL DESIGN AND CLOSE FIXED POCKETS (12 EDGES), ITS HIG POSITIVE GEOMETRY OF INSERT AND DOUBLE-NEGATIVE SEATING GIVES VERY HIGH CUTING EDGE STRENGTH CAN BE USED FOR CAST IRON ROUGH MILLING OPERATION UPTO A DEPTH OF CUT OF 8 MM. THE DESIGN ENSURES MINIMUM NUMBER OF PARTS BY SIMPLIFIED DESIGN OF WEDGE AND SCREW.
|
|
BULL CUTTER FOR DIE & MOULD INDUSTRY - THE BULL CUTTER FROM TAEGUTEC INDIA AVAILABLE WITH FEED RATE CAPABILITIES OF UP TO 4.5 MM/TOOTH. IT HAS UNIQUE DOUBLE CURVED CUTTING EDGE GEOMETRY WHICH ENABLES THE CUTTER TO TAKE A MAXIMUM FEED RATE UP TO 4.5 MM/TOOTH (.177 INCH/TOOTH). THE BULL CUTTER HAS WIDE CHIP GULLET WITH STRONG SCREWS TO CLAMP THE INSERT FIRMLY. THE UNIQUE DOVETAIL TYPE INSERT HAS A EXACTLY MATCHING POCKET ON THE CUTTER BODY ELIMINATING THE NEED FOR ADDITIONAL CLAMPING BY WEDGE ON THE TOP OF INSERT AS IN MOST OF THE COMPETITORS' CUTTERS. THIS UNIQUE DESIGN, GIVES CONSTANT CUTTING FORCE, EVEN IN THE DEEP POCKET MILLING OR WITH LONG OVERHANGS.
|
|
MINI Z-MILL - TAEGUTEC INDIA INTRODUCED THE NEW MINI Z-MILL IN HAS THE POTENTIAL TO REDUCE TOOL COST BY 80%. THIS IS AN PERFECT CHOICE FOR CAST IRON FACE MILLING OPERATIONS FOR DEPTH OF CUT UP TO 3.5 MM. FEATURES CONSIST 12 CUTTING EDEGS, MOST ECONOMICAL VERSION, ENTERING ANGLE 55, SMOOTH CUTTING, RADIAL AND AXIAL RAKE ANGLES ARE NEGATIVE 6, HIGHER FEED RATES AND EXACTLY SUITED FOR LOW POWERED MACHINING CENTRES AND LOW DEPTH OF CUT OPERATIONS. Z-MILL OFFERED GOOD PERFORMANCE AND HIGHER TOOL LIFE, IN CAST IRON AND DUCTILE CAST IRON FACE MILLING APPLICATIONS. IT CAN REPLACE STANDARD FACE MILLING CUTTERS FOR CAST IRON DIA 5-125 MM. BENEFITS INCREASED PRODUCTIVITY INCREASED TOOL LIFE - LOWEST TOOL COST PER COMPONENT; NO RESETTING; SINGLE SPARE PART; AND COMMON INSERT FOR LEFT AND RIGHT HAND CUTTING. THE COMPANY HAS ALSO DEVELOPED HNMX AND HNGX, THE NEW MINI Z-MILL INSERTS: DOUBLE NEGATIVE GEOMETRY GURANTEES FLATNESS AND HIGHER TOOL LIFE; HEXAGONAL SHAPE OF INSERT CREATES IT STRONGER; MAXIMUM DEPTH OF CUT IS UP TO 3.5 MM IN ROUGHING AND SEMI FINISHING; AND USER FRIENDLY SCREW CLAMPING TECHNIQUES.
|
|
MILLING TOOL, MINI CHASEQUAD 90 - TAEGUTEC INDIA MANUFACTURES MILLING TOOL, MINI CHASEQUAD 90 IN EXTENDS THE ADVANTAGES OF CHASEMILL TO 4 CUTTING EDGES AND HAS THE POTENTIAL TO DECREASE TO COST BY 50% FROM THE CURRENT LEVELS. THIS IS AN PERFECT CHOICE AS THE MOST ECONOMICAL END MILLING TOOL WITH A 4-EDGE PROFIT. MORE THAN 50% OF END MILLING OPERATIONS DO NOT NEED RAMPING CAPABILITIES. THE MINI CHASEQUAD 90 CAN REPLACE THE 2-EDGE INSERTS FOR END MILLING WITHOUT ANY CPMPROMISE IN PERFORMANCE. HIGHLIGHTS OF SXMT INSERT: MOST ECONOMICAL INSERT WITH 4 CUTTING EDGES; GOOD STRENGTH AND SUPERB PERFORMANCE; AND MOST ECONOMICAL FOR GENERAL PURPOSE MILLING SUCH AS FACE MILLING, SHOULDER MILLING, SLOT MILLING AND PLUNGING. FEATURES: POSITIVE CUTTING GEOMETRY ENSURES SMOOTH AND EFFICIENT CUTTING WITH GREATER PRECISION LONGER TOOL LIFE; OPTIMUM RANGE OF APPLICATIONS UP TO 6 MM, BASED ON THE APPLICATION; STRONGER SHAPE OF INSERT; BIGGER CLAMPING SCREW FOR RIGID CLAMPING; CHOICE OF SHORT AND LONG SERIES ENDMILLS; DOUBLE POSITIVE GEOMETRY FOR SOFT CUTTING; AND CHOICE OF CVD AND PVD COATED INSERTS FOR DIFFERENT MATERIALS.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Industrial Process Equipments & Accessories
|
| | | |
|
