|
|
Machine, Tools & Components
|
Suppliers Directory
|
ANALYTE AUTOMATION
| | Address : |
15 KIRTI, JIJAMATA ROAD, KOPRI |
| Telephone : |
91-22-25415174 |
| Fax : |
91-22-25380482 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
PRESSURE/MELT PRESSURE TRANSDUCER - CONTACT-LESS/CONTACT-TYPE LINEAR TRANSDUCER NON-CONTACT TEMPERATURE MEASUREMENT OPTICAL ENCODER/WIRE DRAW POTENTIOMETER
|
|
COUNTER-TOTALISERS - COUNTER-TOTALISERS (MODEL 2351) WITH 6-DIGIT, 10MM HIGH DISPLAY THAT ARE FACEPLATE CONFIGURABLE AND EQUIPPED WITH A CURRENT LOOP, RS-232 SERIAL INTERFACE. THESE INSTRUMENTS CONTAIN TWO COUNTERS. ONE FUNCTIONS AS A HIGH FREQUENCY (MAX 100 KHZ) PULSE TOTALISER FOR MONO OR BI-DIRECTIONAL ENCODER WITH/WOTHOUT ZERO. THE SECOND FUNCTIONS AS AN EVENT COUNTER FOR INTERNAL INTERCEPTION OR FROM A LOW FREQUENCY (MAX 250 HZ) INPUT. TYPICAL APPLICATION IS FOR THE DISTANCE MEASUREMENT BETWEEN CUTS OF A CUTTING MACHINE WITH A PIECE COUNTER.
|
|
MAGNETORESTRICTIVE TRANSDUCER - ANALYTE AUTOMATION ARE THE SOLE DISTRIBUTOR FOR INDIA OF GEFRAN, ITALY AND HAVE INTRODUCED LENGTH/DISPLACEMENT MEASURING TRANSDUCER BASED ON THE PRINCIPLE OF MAGNETO-RESTRICTION WITH A TUBE OF FE-NI MATERIAL WITH MAGNETO-RESTRICTIVE CHARACTERISTIC. THE CURRENT PULSE IS GENERATED ALONG THE TUBE THAT GENERATES INSTANTANEOUS CIRCULAR MAGNETIC FIELD ALONG IT & IS FITTED WITH A MAGNET, WHICH IS COMPLEMENTARY MAGNETIC FIELD. THE INTERACTION BETWEEN THE TWO CREATES A TORSION SOUND WAVE FROM THE POINT OF INTERACTION OF THE TWO FIELDS OF APPROX 2850 M/SEC ALONG THE TUBE TOWARDS BOTH ENDS. AN INDUCTIVE PICK-UP CONVERTS THE PASSAGE OF THE WAVE INTO AN ELECTRICAL ECHO PULSE AND THE TIME BETWEEN THE TWO PLUSES IS USED TO CALCULATE THE POSITION OF THE CURSOR AND OFFER THE ADVANTAGE OF HIGH ACCURACY AND RESOLUTION. NO MECHANICAL CONTACT AND HENCE NO WEAR AND TEAR, AND HENCE INFINITE OPERATIONAL LIFE. THE TYPICAL APPLICATION INCLUDES CNC/NC MACHINES, INJECTION MOULDING MACHINE, INDUSTRIAL ROBOTICS, HYDRAULIC PRESS, LEVEL MEASUREMENT, ETC.
|
|
SMART NON-CONTACT TEMPERATURE MEASUREMENT - ANALYTE AUTOMATION ARE THE SOLE DISTRIBUTOR FOR INDIA OF GEFRAN, ITALY, FOR NON-CONTACT TEMPERATURE MEASUREMENT PRODUCTS. THE INTENSITY OF THESE RADIATIONS IS PROPORTIONAL TO THE TEMPERATURE OF THE BODY. THERE ARE THREE TYPES OF IR TRANSMITTERS AND THE SELECTION OF THE PARTICULAR TYPE DEPENDS ON THE APPLICATION. THE "WIDEBAND THERMOMETERS" (TOTAL RADIATION) ARE USED FOR LOW TEMPERATURE APPLICATION WHEREAS THE "NARROWBAND THERMOMETERS" (MONOCHROMATIC) ARE USED FOR HIGH TEMPERATURE MEASUREMENT AND/OR MEASUREMENT ON SPECIAL MATERIALS AND THE "RATIO THERMOMETERS" ARE USED WHENEVER THE TARGET IS PARTIALLY VISIBLE OR FOR THE OBJECTS WITH VERY LOW EMMISSIVITY OR WHEN THERE IS SMOKE, DUST, STEAM WHICH OBSCURES THE VISION PATHWAY. THE IR ENERGY EMITTED BY A SURFACE DIFFERS ACCORDING TO THE COMPOSITION AND PHYSICAL CONDITIONS AND THE PARAMETER USED TO CHARACTERIZE OBJECT SURFACE IS CALLED EMMISSIVITY. THE ONE MORE VERY IMPORTANT FACTOR WHICH DECIDES THE SELECTION OF THE MODEL IS ON THE BASIS THAT WHETHER THE MEASUREMENT HAS TO BE DONE CONTINUOUSLY (PROCESS) OR FOR THE TEMPORARILY (PORTABLE). IN SHORT THE SELECTION OF IR TEMPERATURE TRANSMITTER IS VERY COMPLEX PROCESS AND NEEDS THE COMPLETE STUDY OF THE APPLICATION.
|
|
LENGTH / DISPLACEMENT MEASUREMENT TRANSDUCER - LENGTH / DISPLACEMENT MEASUREMENT TRANSDUCER IS THE LATEST ATTRACTION FROM ANALYTE AUTOMATION. IT'S BASED ON THE PRINCIPLE OF MAGNETO-RESTRICTION, INTRODUCED BY GERFAN SPA, ITALY. HERE THE TUBE OF FE-NI MATERIAL WITH MAGNETO-RESTRICTIVE CHARACTERISTIC IS MADE USE OF. THE CURRENT PULSE IS GENERATED ALONG THE TUBE THAT GENERATES INSTANTANEOUS CIRCULAR MAGNETIC FIELD ALONG IT. THE CURSOR CONTAINS A MAGNET, WHICH IS COMPLEMENTARY MAGNETIC FIELD TO THE GENERATED MAGNETIC FIELD. THE INTERACTION BETWEEN THE TWO CREATES A TORSION SOUND WAVE FROM THE POINT OF INTERACTION OF THE TWO FIELDS. THE SOUND WAVE RUNS AT 2850 M/SEC ALONG THE TUBE TOWARDS BOTH ENDS. AN INDUCTIVE PICK-UP CONVERTS THE PASSAGE OF THE WAVE INTO AN ELECTRICAL ECHO PULSE. THE TIME BETWEEN THE TWO PULSES IS USED TO CALCULATE THE POSITION OF THE CURSOR. THE ADVANTAGES OF USING THESE TRANSDUCERS ARE THAT OF HIGH RESOLUTION AND ACCURACY. NO MECHANICAL CONTACT, NO WEAR AND TEAR, AND HENCE INFINITE OPERATIONAL LIFE. BECAUSE OF SCALED TUBE THE PRODUCT IS OF IP-67 GRADE PROTECTION. TYPICAL APPLICATION INCLUDES CNC/NC MACHINES, INJECTION MOULDING MACHINE, INDUSTRIAL ROBOTICS, HYDRAULIC PRESS, LEVEL MEASUREMENT, ETC.
|
|
PROSOL CHEMICALS PVT LTD - ANALYTE AUTOMATION PRESENTS PROCESS NON-CONTACT THERMOMETERS (IRTEC 80), MADE BY EUROTRON INSTRUMENTS SPA, ITALY. THESE INFRARED THERMOMETERS ARE MAINLY TO BE USED ON A HUGE RANGE OF INDUSTRIAL ALD RESEARCH APPLICATIONS. THEY ARE OF CYLINDRICAL CHASSIS THAT ARE MAINLY ABLE TO CONTAIN SINGLE REFLEX LENS OPTIC, FILTERS, IR SENSORS AND ELECTRONIC CIRCUITS. THE THERMOMIETERS HAVE A 4-20 MA OUTPUT SIGNAL LINEAR WITH MEASURING RANGE AND HAS THE POWER TO BE USED CONNECTED WITH STANDARD INDICATORS AND ACQUISITION SYSTEMS, LIKE PLCS, DCS, INDICATORS ETC. THE TECHNICAL SPECIFICATIONS OF NON CONTACT THE MOMETERS INCLUDE: WORKING TEMPERATURE OF 0 TO +60 C, STORAGE TEMPERATURE FROM 30 C TO +60 C, CURRENT LOOP SUPPLY OF 18 TO 32 VCC, TEMPERATURE STABILITY 0.02 PER CENT/ C FOR TEMPERATURE OVERING REFERENCE BAND FROM +15 C TO +35 C.
|
|
HUMIDITY TRANSMITTER - ANALYTE AUTOMATION OFFERS MACHINES. IN VARIOUS OPERATIONS, THE REQUIREMENT OF MEASURING AND CONTROLLING THE HUMIDITY ACCURATELY IS MUST. IN CASE OF PHARMACEUTICAL PLANTS THE HUMIDITY OF THE SURROUNDING HAS TO BE MAINTAINED UNIFORM AT PARTICULAR VALUE IF NOT COMPLETELY SO THE QUALITY OF THE PRODUCT GETS DEGRADED. WITH THE HELP OF THE HUMIDITY TRANSDUCER CAN BE THE HUMIDITY OF THE SURROUNDING MEASURE.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Motors, Gears & Drives
|
| | | |
|
