|
|
Machine, Tools & Components
|
Suppliers Directory
|
TWIN ENGINEERS PVT LTD
Oil Filling Machines, Brake Oil, Clutch Fliud, Steering Oil, Radiant Coolant Filling M/cs, Adhesive & Sealant Dispensing, Machines, Lacquer Coating Machine, Packaging Machine, Robotic & Cnc Machines, Pu Shoe Sole Machine.
| | Address : |
J-524,MIDC BHOSARI |
| Telephone : |
020-7121626020-7128118 |
| Fax : |
91-20-7121849 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
TWO COMPONENT METER-MIX DISPENSING MACHINE - A TWO COMPONENT METER-MIX DISPENSING MACHINE FOR POTTING,ENCAPSULATION,FILING AND MOULDING OF TWO PART MATERIALS LIKE EPOXIES,POLYURETHANES,SILICONES,ETC.THE MACHINE IS ELECTRO-PNEUMATICALLY OPERATED.THE RESIN AND HARDENER ARE AUTOMATICALLY METREDIN THE DESIRED RATIO,MIXED AND DISPENSED IN A PRECISE QUANTITY.THE PROCESS INVOLVES THE PRE-CONDITIONING OF RESIN AND HARDENERBY HEATING TO IMPROVE THEIR FLOW RATE.THE METERING OF THE TWO COMPONENTS IN THE DESIRED RATIO IS ACHEIVED BY USING EITHER A PISTON TYPE MECHANISM OR A LARGE OR A GEAR TYPE MECHANISM.A HIGH SPEED DYNAMIC OR STATIC MIXER THEN HOMOGENOUSLY MIXES THIS METRED MATERIAL.THE SYSTEM HAS AN AUTO-FLASH UNIT TO KEEP THE MIXING CHAMBER CLEAN FROM THE MIXED MATERIAL.
|
|
BRAKE OIL FILLING MACHINES - BRAKE OIL FILLING MACHINES IS FULLY AUTOMATIC AND IT IS CONTROLLED THROUGH PLC.THE OPERATION INVOLVES EVACUATION OF THE COMPONENT, CHECKING FOR LEAK, FILL THE LIQUID UNDER PRESSURE AND MAINTAINING THE REQUISITE LEVEL OF OIL IN THE BRAKE BOWL. PRIOR TO THE MATERIAL BEING PRESSURISED. IF THE SYSTEM DETECTS MAJOR VACUUM LEAK, THE FILLING CYCLE WILL GET ABORTED. OTHER FEATURES INCLUDE FACILITY FOR ADJUSTING PARAMETERS SUCH AS DURATION OF VACUUM, FLUID LEVEL INSIDE BRAKE RESERVOIR, ETC. THE IMPORTTANT MESSAGES, ALARMS, CYCLE STATUS, FAULT, ETC.
|
|
FIXED RATIO HIGH VOLUME EPOXY POURING MACHINE - A PLC-BASED HIGH VOLUME DISPENSING MACHINE FOR POURING METERED AND MIXED FILLED EPOXY/PU COMPOUNDS INTO ELECTRICALS SUCH AS CURRENT AND POTENTIAL TRANSFORMERS. THE MIXED COMPOUND IS POURED WITH THE HELP OF SUITABLE NOZZLE ATTACHED TO MIXING STATION IN TO CLOSE MOULDS USED FOR PRIMARY CORE OF THE TRANSFORMERS. THE RESIN AND HARDENER ARE METERED ACCURATELY IN A PROPER RATIO. HIGH-PRESSURE POSITIVE DISPLACEMENT TYPE SINGLE ACTING PISTON PUMPS DRIVEN BY PNEUMATIC LINEAR ACTUATOR ARE USED TO ACHIEVE THE PRECISE RATIO. THE MATERIAL TANKS ARE PROVIDED WITH MOTORISED AGITATORS TO AVOID THE SEDIMENTATION OF FILLERS IN TO THE RESPECTIVE TANKS. IT ALSO FACILITATES IN MAINTAINING UNIFORM MATERIAL TEMPERATURE. THE UNIQUE DESIGN OF BLADED ASSISTS THE PROCESS. TANKS ARE PROVIDED WITH HEATING SYSTEM TO IMPROVE FLOW BY REDUCING VISCOSITY. PID TEMPERATURE CONTROLLERS ARE USED FOR ACCURATE TEMPERATURE CONTROL. HOMOGENEOUS MIXING TAKES PLACE IN THE MOTIONLESS MIXER. AN APPROPRIATE NOZZLE TIP IS ATTACHED TO THE MIXER OUTLET AND AUTO FLUSHING SYSTEM HAS BEEN PROVIDED TO TAKE CARE OF POST MIXING CLEANING OPERATIONS.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
