|
|
Machine, Tools & Components
|
Suppliers Directory
|
ALL CUT INDIA
| | Address : |
SHED NO: 13/B, GIDC VITHALWADI, |
| Telephone : |
278-428715 |
|
Email is not available |
| |
|
Products |
|
DRILL-POINT GRINDING MACHINES - THE MACHINES TAKE CARE OF EVERY ASPECT OF DRILL POINT GRINDING PRECESION POINT WITH PERFECT GEOMETRY RESULT IN ACCURATE DRILLS WHICH PRODUCE MORE PRECISELY-CENTRED ROUND HOLES PER REFRIND
|
|
MAGNETIC DRILLING MACHINES - MAGNETIC BASE DRILLING MACHINE WHICH ARE PORTABLE WITH TWIST DRILL UP TO 32 MM AND WITH BROACH CUTTER, MAKING HOLES UP OT 80 MM WITHOUT PILOT DRILLING. THESE DRILLING MACHINES ARE AVAILABLE WITH ATLAS COPCO, GERMAN MAKE 4 SPEED GEAR HEAD FOR VARIOUS TYPE OF DRILLING WORKS. DRILL HEADS ARE PROVIDED WITH SAFETY OVERLOAD CLUTCHES TO REMOVE MAINTENANCE OF ARMATURE AND CARBON BRUSH. DRILL MOTORS WITH 1150 W ARE PROVIDED FOR MAKING HOLES OF HIGHER CAPACITY WITHOUT PILOT DRILLING. THE BROACH CUTTER ATTACHMENT HELPS IN MAKING BIGGER HOLES. BROACH CUTTER CAN CUT ONLY A BORDER AND SAVE INSIDE MATERIAL. THE FEATURES ARE HIGH FREQUENCY 2 POLE ELECTRO MAGNETIC BASE FOR QUICK AND PERFECT CLAMPING AND MAGNETIC BASE REMOVE TIME OF CLAMPING. THE BASE OF MAGNET IS TOTALLY EPOXY SEALED AND SAFE WITH USING COOLANT
|
|
MILLING CUM DRILLING MACHINE - THE LATEST ENTICEMENT FROM ALL CUT INDIA IS A MULTI PURPOSE MILLING CUM DRILLING MACHINE FOR MULTI WORKS IN WORKSHOP LIKE MILLING, DRILLING, BORING REAMING AND TAPPING. IT IS AVAILABLE WITH MT3 SPINDLE. IT WORKS UP TO 25 MM DIA DRILLING AND E 40 TAIL-TYPE COLLET ADAPTOR FOR PERFECT CLAMPING OF END MILL CUTTERS UP TO 3 MM TO 20 MM. THE MACHINE HAS A HUGE 450 MM X 250 MM SIZE TABLE ALONG WITH MACHINEABLE GIBS. IT ALSO HAS A HEAVY X TABLE FOR MULTI MILLING WORKS AND TABLE WITH ZERO SETTING DIALS. A WIDE RANGE OF EIGHT SPINDLE SPEED (90 TO 2000) FOR DIFFERENT WORKS SPINDLE HAS FINE DOWN FEED. FOR EVERY TOOL ROOM AND MAINTENANCE SHOP THIS DRILLING MACHINE IS USEFUL.
|
|
MAGNETIC DRILLING MACHINES - ALL CUT INDIA MANUFACTURES PORTABLE MAGNETIC DRILLING MACHINES OF 50 MM CAPACITY WITH MAIN ADVANTAGES LIKE DRILLING MACHINES IS THAT EVEN UNSKILLED PERSONS CAN OPERATE THEM. THE MACHINES CUT ONLY THE BORDERS WITH BROACH CUTTERS AND THUS SAVE INSIDE MATERIAL, RATHER THAN WITH ONLY A 24 KG OF MACHINE MAKING UP TO 50 MM DIAMETER HOLE IN 50 MM DEPTH WITHOUT ANY PILOTS IN SINGLE PASS WITH ONLY NORMAL PRESSURE. THE MACHINES ARE THREE TO FOUR TIMES FASTER THAN TWIST DRILLS AND SUITABLE FOR HEAVY CONSTRUCTION AND BIG JOBS OF DRILLING. CUTTERS ARE ATTACHED WITH THE MACHINE SPINDLES, WHICH RUN IN NEEDLE BEARING GUIDES TO REMOVE THE VIBRATION AND GET HOLES WITH HIGH SURFACE FINISH. HIGH FREQUENCY ELECTRO-MAGNETIC BASE IS PROVIDED FOR QUICK AND PERFECT CLAMPING ON ALL THE JOBS FROM 18 TO 50 MM HOLES AND CAN BE EASILY USED THE IN VERTICAL, HORIZONTAL AND IN OVERHEAD POSITION. ADDITIONAL ATTACHEMENTS CAN BE USED FOR DRILLING ON PIPE AND RADISH SURFACE.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Machine, Tools & Components Products
|
| | | |
|
