|
|
Machine, Tools & Components
|
Suppliers Directory
|
FLOW CONTROL INDUSTRIES
| | Address : |
27 A SHUKLA ESTATE OSHIWARA S V ROAD JOGESHWARI(W) |
| Telephone : |
022-6788805, 6787104 |
| Fax : |
22-6786995 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
SERVICE SHAFTS & PENDANTS - THESE ARE DESIGNED TO FACILITATE SERVICES TO BE BROUGHT TO WORKING AREA/STERILE AREA IN CLOSED NEST FASHION IN ORDER TO PROVIDE EASY ACCESS TO SERVICES WITHIN SAFE OPERATABLE DISTANCE WHILE MAINTAINING GMP PARAMETERS.PENDANTS ARE SEALED ON THE OUTER END OF THE BOTTOM END ENTERING STERILE AREA WHILE THE INTERNALS ARE SEALED BY MEANS OF RUBBER PACKING AND SILICONE SEALANT AT THE TOP ENBD ONCE THE SERVICES ARE INSTALLED.HEIGHT OF THE PENDANTS CAN BE ADJUSTED BY MEANS OF SPECIAL HOLDING CLAMPS GROUTED ON UTILITY FLOORS.THE PENDENTS ARE MANUFACTURED IN SS-304 SS-316 AND SS-316L GROUNDED BUFFED ELECTRO-POLISHED TO PHARMA STANDARDS PRESSURE RATING DEPENDS ON SERVICE INVOLVED.
|
|
GMP DIAPHRAGM VALVES - THESE CAN BE UTILISED TO VIRTUALY ELIMINATE DEAD LEGS IN THE DESIGN OF POINT OF USE OUTLETS IN A TYPICAL DISTRIBUTION LOOP THE PROCESS FLUID FLOWS THROUGH THE VALVE BODY THE OUTLET CAN ALSO BE UTILISED AS A STEAM CONDENSATE DRAIN OR AS A DIVERT PORT THE BODY CONSTRUCTION IS SANITARY HENCE NO SKILLED PERSON IS REQUIRED FOR ASSEMBLY/DISASSEMBLY
|
|
PENDENTS - PENDENTS FOR PARMA BIOTECH FOOD BEVERAGE AND DEIRY INDUSTRIES ARE DESIIGNED TO TAKE WFI/DM LOOPS ELECTRICAL CABIING TELEPHONE INTERCOM CABLING STEAM LINE COMPRESSED AIR ETC THE ENTRY END OF THE PENDENTS CONNECT REQUIRED SERVICES OF A PARTICULAR AREA TO THE PIPE WORK OR ELECTRICAL RUNNING THROUGH THE UTILITY FLOOR THE PENDENTS ARE DESIGNED TO TAKE ELECTRICAL WATER STEAM AND GASES HOUSED IN 4 SEGMENT THE PENDENTS ARE SEALED ON THE OUTER DIAMETER BETWEEN THE SERVICE FLOOR AND FALSE CEILING TO MAINTAIN THE STERILE PARAMETER OF A GIVEN AREA INTERNALS ARE SEALED AT THE TOP END AFTER ALL SERVICES ARE INSTALLED BY MEANS OF RUBBER PACKING AND SILICON SEALANT THE BOTTOM END IS ALSO SEALED IN A SIMILAR MANNER THIS PREVENTS CROSS CONTAMINATION THE PENDENTS ARE SO DESIGNED THAT THE BELL END CAN BE EASILY LIFTED FOR MAINTENANCE PURPOSE AS AND WHEN REQUIRED GIVING EASY ACCESS TO THE INTERNALS
|
|
POSITIVE DISPLACEMENT FLOWMETER - FLOW CONTROL SYSTEMS OFFERS POSITIVE DISPLACEMENT ROTARY PISTON FLOW METERS FOR VARIOUS LIQUIDS TO BE MEASURED ACCURATELY IN INDUSTRIES IN A SIZE OF 50 MM NB, HAVING FLOW RANGES FROM 50 TO 600 LPM. THESE FLOWMETERS OFFER AN ACCURACY OF ±0.5% OF THE MEASURED VALUE WITH NEGLIGIBLE PRESSURE DROP WITH ADDED SPECIAL FEATURES OF FLAMEPROOF ENCLOSURE CERTIFIED BY CMRI DHANBAD, FOR APPLICATIONS IN HAZARDOUS AREAS. OTHER RANGES ARE FROM SIZES 10 MM TO 40 MM NB HAVING FLOW RANGE OF 0.2 TO 200 LPM, HAVING FEATURES LIKE ONLY ONE MOVING PART; CAN ALSO WORK BI-DIRECTIONALLY; NON-CONTACTING SENSOR; BRIGHT LED DISPLAY COUNTERS, WHICH ARE VISIBLE FROM 20 FEET DISTANCE; BATCH/ TOTALISER/RATE OF LOW/PULSE OUTPUT AND 4-20 MA OUTPUT FOR PC/PLC/DCS CAN BE PROVIDED; AND THE ELECTRONIC CONSTRUCTION IS UPGRADABLE TO COMPLETE AUTOMATION WITH APPLICATIONS IN CHEMICAL, PETROLEUM, PHARMACEUTICAL AND ENGINEERING INDUSTRIES.
|
|
ROTARY PISTON FLOWMETER - FLOW CONTROL SYSTEMS OFFERS POSITIVE DISPLACEMENT ROTARY PISTON FLOW METERS FOR LIQUID MEASURING APPLICATIONS IN INDUSTRIES THAT RANGES BETWEEN 10 MM NB TO 40 MM NB AND FLOW RANGES ARE FROM 0.2 TO 200 LPM HAVING AN ACCURACY OF ± 0.5% OF THE MEASURED VALUE WITH NEGLIGIBLE PRESSURE DROP WITH WIDE APPLICATIONS IN ENGINEERING, CHEMICAL, PHARMACEUTICAL AND PETROLEUM INDUSTRIES.
|
|
SANITARY STAINLESS STEEL FITTING - PRESENTED BY FLOW CONTROL INDUSTRIES IS A COMPLETE RANGE OF SANITARY STAINLESS STEEL FITTINGS FOR PHARMA, BEVERAGE, DAIRY, COSMETICS BIOTECH, FOOD,AND ALLIED INDUSTRIES. THE RANGE INCLUDES BENDS, TEES, REDUCERS, ADAPTORS, CLAMPS, FERRULES, ETC. THE FITTINGS ARE MANUFACTURED FROM SS 304/316/316L AND OFFERED IN SIZES ¾" TO 4". THE FITTINGS ARE FREE FROM UNCLEANABLE POCKETS AND SUITABLE FOR IN PLACE FOR CLEANING. THE END CONNECTIONS CAN BE TRICLAMP, IDF, SMS, DIN, FLANGED AS PER BS/ANSI STANDARDS. WE ALSO UNDERTAKE COMPLETE PIPING PROJECTS FROM DETAILED ENGINEERING DESIGN, INSTALLATION, SUPPORT AND DOCUMENTATION CONFORMING TO GMP, 3A OR USFDA STANDARDS.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Industrial Process Equipments & Accessories
|
| | | |
|
