|
|
Machine, Tools & Components
|
Suppliers Directory
|
RAICO ENGINEERS
| | Address : |
UNIT NO 14-AF 1ST FLR NEW EMPIRE INDL ESTATE KONDIVITA ROAD J B NAGAR ANDHERI(E) |
| Telephone : |
022-8342079, 8320514. 0 |
| Fax : |
91-22-8381390 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
FILTER SETS - THESE UNITS CONSIST OF UNITS PRE CONNECTED VIZ FILTER REGULATIORS SILICA GEL DRYERS ACTIVATED CARBON FILTERS AND COALESCING FILTERS THE UNITS GIVE DIRT-FREE AND MOISTURE-FREE AIR WITH DIRT REMOVAL UP TO 5 MICRONS AND MOISTURE REMOVAL UP TO 99% THE FILTER SETS ARE INSTALLED AT MANY POWDER COATING SPRAY PAINTING AND VARNISH FACILITIES
|
|
FILTER SET FOR POWDER COATING, SPRAY PAINTING & VARNISHING APPLICATION - PRESENTED BY RAICO ENGINEERS THE FILTER SET FOR POWDER COATING, SPRAY PAINTING AND VARNISHING APPLICATIONS CONSISTS OF THE FOLLOWING PRE-CONNECTED UNITS: FILTER REGULATOR + SILICA GEL DRYER + ACTIVATED CARBON FILTER + COALESCING FILTER. THIS UNIT GIVES DIRT FREE AND MOISTURE FREE AIR WITH DIRT REMOVAL UP TO 5 MICRON AND MOISTURE REMOVAL UP TO 99%. SINCE POWDER COATING GUNS AND SPRAY GUNS REQUIRE HIGHLY PURE AND DRY AIR THESE UNITS ARE INSTALLED IN AIR LINES PRIOR TO THE GUNS. RAICO MAKE FILTER SETS HAVE BEEN INSTALLED AT MANY POWDER COATING, SPRAY PAINTING AND VARNISH FACILITIES. THESE HAVE REPORTED CONSIDERABLE IMPROVEMENT IN SURFACE FINISH FOR ALL TYPE OF SURFACES AFTER THE INSTALLATION OF THESE SETS.
|
|
AIR FILTER-REGULATOR - EACH PNEUMATIC OPERATED TOOL OR INSTRUMENT OPERATES EASILY AT A PARTICULAR PRESSURE AND ON CLEAN AND DRY AIR. AS THE LINE PRESSURE VARIES AND IS IMPURED WITH DIRT MOISTURE AND OIL, USE OF AIR FILTER REGULATOR FACILIATES OPERATION IN MOST ECONOMICAL WAY. RAICO ENGINEERS PRODUCES A RANGE OF HIGH PERFORMANCE AIR FILTER-REGULATOR UNITS. SALIENT FEATURES: EXTRUDED ALUMINIUM ALLOY BODY; BALANCE VALVE DISC AND NYLON REINFORCED DIAPHRAGM GIVE QUICK RESPONSE (HIGH CAPACITY SERIES ONLY); BIG ORIFICE PROVIDES MINIMUM PRESSURE DROOP FOR HIGH FLOW CAPACITIES (HIGH CAPACITY SERIES ONLY). SIZES AVAILABLE: 1/4", 3/8", 1/2", 3/4", 1", 11/2" AND 2" BSP (F).
|
|
PILOT PRESSURE REGULATOR - THESE ARE BASICALLY PRESSURE REGULATORS REDUCE AND REGULATE THE OUTPUT PRESSURE FROM MAIN LINE. THE OUTPUT PRESSURE WILL BE PROPORTIONAL TO SIGNAL PRESSURE. THE SIGNAL PRESSURE CAN BE FROM ANOTHER REGULATOR, TRANSDUCER OR INSTRUMENT SUCH CONSTRUCTION MAKE EASY TO MOUNTING OF THE PILOT REGULATOR IN REMOTE PLACE LIKE AT HEIGHT INSIDE, OUT INTO FIELD AND GET A CONTROLLED OUTPUT PRESSURE FROM MAIN LINE BY PROVIDING A SIGNAL WHICH IS REGULATED TO DESIRED PRESSURE. BY REPLACING REGULATING SPRING WITH A REGULATED PRESSURE SIGNAL, HYSTERESIS, WHICH IS AN INHERENT CHARACTERISTIC OF SPRING-OPERATED REGULATOR, CAN BE ELIMINATED. SIZES AVAILABLE: 1/4", 3/8" AND 1/2" BSP (F)/NPT (F). SPECIFICATIONS: MAX SUPPLY PRESSURE - 10 KG/CM, MAXI SIGNAL PRESSURE - 10 KG/CM; MAXI TEMPERATURE - 80 C; AND OVERALL DIMENSIONS - 80 DIA MM * 75 MM HEIGHT.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Chemical Process Machinery & Equipments
|
| | | |
|
