|
|
Machine, Tools & Components
|
Suppliers Directory
|
DATTATRAY ENTERPRISES
| | Address : |
1 MHB SHOPPING CENTER VARTAK NAGAR, |
| Telephone : |
91-22-25448639 |
| Fax : |
91-22-25470007 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
OIL LUBRICATION/GEAR PUMPS - THE OIL LUBRICATION UNIT CONSISTS OF ELECTRICAL SINGLE/3 PHASE MOTOR COMPILED WITH GEAR PUMPS HAVING MAXIMUM PRESSURE OF 20 BAR AND A FLOW OF 1 LITERS PER MINUTE VERTICAL MOUNTING FLOAT SWITCHES ARE PROVIDED TO LOW OIL SIGNALS PRESSURE SWITCHES ARE PROVIDED TO GIVE LOW PRESSURE SIGNALS LUBRICATION UNITS ARE PROVIDED WITH 12 BAR FACTORY SET PRESSURE GEAR PUMPS OF 0.5 LPM TO 30 LPM ARE AVAILABLE AT MAXIMUM PRESSURE OF 30 BAR
|
|
LUBRICATION UNIT - A READY-TO-USE LUBRICATION UNIT IS THE LATEST OFFERING FROM
DATTATRAY ENTERPRISES. THIS IS A SOPHISTICATED AUTOMATIC LUBRICATION SYSTEM, WHICH DOES THE RIGHT OILING OF ANY MACHINERY WITHOUT PERSISTENT ATTENTION. THIS IS THE FIRST LUBRICATION UNIT MADE IN INDIA TO USE GEAR PUMPS AS A STANDARD, WITH GUNMETAL BUSHES, AND THE FIRST TOTAL READY-TO-USE LUBRICATION UNIT. THE UNIT CONSISTS OF FHP ELECTRIC MOTOR OF SINGLE PHASE, GEAR PUMP (0.5/1 LPM AT MAX PRESSURE 25 BAR), MONOBLOCK WITH IN-BUILT RELIEF VALVE, SUCTION STRAINER, AIR BREATHER, FLOAT SWITCH, TANK (3/5/8 LITRE, MS OR CI BODY) AND CONTROLLER WITH ON/OFF SETTING MOUNTED ON THE UNIT ITSELF. THE FHP MOTOR IS USED FOR LESS POWER CONSUMPTION. GEAR PUMPS ARE USED, AS THEY ARE POSITIVE IN SUCTION. GUNMETAL BUSHES ARE USED TO GIVE MORE LIFE TO THE PUMP. MONOBLOCK IS USED TO MAKE MOST SIMPLE ASSEMBLY OF MOTOR AND PUMP. A VERY EASY CLEANING AND OVERHAULING OF THE UNIT IS POSSIBLE. SUCTION STRAINER IS USED TO SUCK CLEAN OIL FROM THE TANK. FLOAT SWITCH IS USED TO GIVE LOW LEVEL SIGNAL OF OIL IN TANK. AIR BREATHER WITH FILTER IS USED TO POUR FILTER OIL IN THE TANK. IT IS THUS A LUBRICATION CONTROLLER WITH ON/OFF TIME ADJUSTABLE TIME SETTING AND PROVISION TO CUT THE UNIT WHEN OIL LEVEL OR PRESSURE GOES DOWN. ON TIME IS SETTABLE FROM 1 SEC TO 10 SEC. OFF TIME IS SETTABLE FROM 3 MIN TO 600 MIN (10 HR). IF PRESSURE/OIL LEVEL GOES DOWN, THE CONTROLLER WILL CUT THE LUBE UNIT AND WILL GIVE SIGNAL FOR FAULT. AT THE SAME TIME ONE FAULT RELAY WILL ALSO GET ON, TO THE USER TO PROVIDE ADDITIONAL SAFETY. IDEAL FOR SMALL SPMS, MACHINING CENTRES, PRINTING MACHINES, ETC.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
