|
|
Machine, Tools & Components
|
Suppliers Directory
|
ELECON ENGINEERING CO LTD
| | Address : |
POST BOX #6, VALLABH VIDHYANAGAR |
| Telephone : |
02692-236469, 236513 |
| Fax : |
91-2692-236527. |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
GEAR BOXES - GEAR TYPE SBN 350/830/S/SO IS DESIGNED WITH DOUBLE STAGE REDUCTION SO AS TO TRANSMIT THE POWER FROM 0-225-225 KW AT 0-380-1150 RPM DC MOTOR WITH REDUCTION RATIO OF 7.188/1. THE SHAFTS ARE SUPPORED IN ANTI-FRICTION SPHERICAL ROLLER BEARINGS OF ADEQUATE SIZE TO TAKE CARE OF RADIAL LOADS PERMITTING LARGE DEGREE OF FREEDOM AGAINST MISALIGNMENT.
|
|
HELICAL GEARS/BEVEL HELICAL GEAR - HELICAL GEARS/BEVEL HELICAL GEAR IS THE LATEST PRODUCT FROM
ELECON ENGINEERING CO LTD.THIS IS IN TECHNICAL COLLABORATION WITH PLV ANTRIEB WERNER REIMERS GMBH & CO, GERMANY. BASED ON THE MODULAR GEAR CONCEPT IS ITS DESIGN AND IT FEATURES MONOBLOCK HOUSING FOR THE SIZES UP TO 31 AND SPLIT HOUSING FOR THE SIZES UP TO 31 AND SPLIT HOUSING FROM SIZE 35 TO 67. THERE IS A HIGH DEGREE OF FLEXIBILITY AS REGARDS TO MOUNTING POSITION OF GEAR UNITS, INVERTED, HORIZONTAL, VERTICAL, ETC. OTHER FEATURES INCLUDE COMMON HOUSING FOR HELICAL AS WELL AS SPIRAL CUM HELICAL GEAR UNITS; HIGH DEGREE OF STANDARDIZATION AND ADOPTION OF COMMON PARTS GIVES OPTIMUM AVAILABILITY AND FASTER DELIVERY OF SPARES; CASE HARDENED AND GROUND GEARS WITH PROFILE CORRECTION FOR OPTIMUM LOAD CARRYING CAPACITY; GEARS AND BEARINGS ARE SPLASH LUBRICATED AS STANDARD; FORCED LUBRICATION BY BUILT-ON OR MOTOR DRIVEN PUMP AS OPTIONAL; ADDITIONAL COOLING DEVICES SUCH AS FAN COOLING, COOLING COIL, EXTERNAL OIL COOLER, ETC, DEPENDING UPON SERVICE CONDITIONS. OUTPUT SHAFT EXECUTION IS IN FOLLOWING MANNERS - SOLID SHAFT, HOLLOW SHAFT WITH KEY AND HOLLOW SHAFT WITH SHRINK DISC. OUTPUT TORQUE CAPACITY - 4, 80,000 NM MAXIMUM, RATIO RANGE - 1.25 - 710 AND INPUT SPEED - 1500 RPM (MAX).
|
|
SPEED CHANGE GEARBOX - SPEED CHANGE GEARBOX IS THE LATEST ATTRACTION FROM ELECON ENGINEERING COMPANY LIMITED. THEY ARE MADE TO OBTAIN VARIABLE SPEED OF ROLLING MILL TO SUIT THE REQUIREMENTS OF THE CLIENTS, FOR THE GROWING NEED OF STEEL ROLLING MILLS. SPECIAL-PURPOSE GEARBOXES LIKE THIS HAVE BEEN SUPPLIED TO PRECISION EQUIPMENTS, FLAT PRODUCTS AND TO ULTIMATE USERS SUCH AS COMET STEELS, SIPTA STEELS, NANDED, AND HIM ISPAT, HIMACHAL PRADESH. THE GEARBOXES ARE DESIGNED FOR TRANSMITTING 0-1000-1000-900 KW POWER AT 0-350-1150-1250 INPUT SPEED AND SPEED CHANGE RATIO OF 1.0689/1 AND 1.857/1. THE SPEED CHANGING IS DONE BY MEANS OF A SHIFTER COUPLING PROVIDED ON THE INPUT SHAFT THROUGH A LEVEL ARRANGEMENT, WHICH IS HYDRAULICALLY ACTUATED. THE SPEED CHANGE GEARBOX IS COUPLED TO A DC MOTOR THROUGH THE GEARED COUPLING AT INPUT SHAFT, AND THE OUTPUT SHAFT OF THE GEARBOX IS COUPLED WITH THE MAIN GEARBOX BY GEARED COUPLING. COUPLED TO A ROLLING MILL FOR COILER, UNCOILER, REWINDER, PAYOFF AND DECOILER IS THE MAIN GEARBOX.
|
|
WORM GEAR UNIT - ELECON ENGINEERING COMPANY COMES THROUGH WITH THEIR LATEST INNOVATION. IT IS A NEWLY DESIGNED AND DEVELOPED SERIES, A LEAP AHEAD IN GEAR TECHNOLOGY. A COMBINATION OF NEW DESIGN WITH FACTORY FILLED SYNTHETIC LIFE TIME LUBRICATION AVAILS HIGHER POWER RATING IN GEAR UNIT SIZES 1-5/8", 1¾", 2", 2¼" AND 3". IT PROVIDE THE MEANS IN SELECTION OF ONE SIZE LOWER, AND OFFERS BETTER ECONOMICAL SOLUTION. WORM GEAR UNIT SIZES 3.54" TO 10.5" PROVIDE IMPROVED POWER RATINGS. SUPER SERIES SPLIT HOUSING HIGH POWER GEAR UNIT SIZES 12", 14" AND 17" WITH NEW DESIGN PROVIDES IMPROVED POWER RATINGS. ALSO OFFERED IN OTHER MODELS LIKE: HEAVY DUTY STIRRER GEAR UNITS; COOLING TOWER GEAR UNITS; DOUBLE REDUCTION: WORM-WORM, HELICAL-WORM; AND WORM GEARED MOTORS. ABOVE ALL, THESE PROVIDE IMPROVED POWER RATINGS.
|
|
COOLING TOWER GEARBOXES - PRESENTED BY ELECON ENGINEERING COMPANY LTD. THE COOLING TOWER GEAR BOXES ARE DESIGNATED AS KBV-NL. THESE ARE TWO STAGE GEAR BOXES HAVING 1ST STAGE OUT OF SPIRAL BEVEL PAIR DULY CASE HARDENED AND LAPPED WITH ANOTHER HELICAL PAIR WITH CASE HARDENED AND GROUND. NORMALLY OUTPUT SHAFT IS VERTICALLY UPWARD WHICH TAKES THE DYNAMIC THRUST OF FAN AS WELL AS DEAD WEIGHT OF THE SAME BY VIRTUE OF THRUST BEARING, WHICH IS OFFERED, IN THE GEARBOX. THE GEARBOX BODY IS OUT OF CI AND THE TOP BEARING AS WELL AS GEAR MESHING IS LUBRICATED BY A BUILT ON PUMP. THE PRESSURE GAUGE AND PRESSURE SWITCH IS CATERED FOR MONITORING THE PRESSURE AND REMOTE SENSING. IT IS FAVORABLE TO HAVE STAINLESS STEEL PIPING FOR LUBRICATION AS WELL THE HERMETICALLY SEALED VIBRATION SWITCH AS THE GEAR BOX IS WORKING INSIDE THE COOLING TOWER. THE RATING AND SIZE OF THESE GEARBOXES ARE AS PER ELECON CATALOGUE NO.122/2/G 89.
|
|
ROLL STAND OF SIZE MW 355 J - PRESENTED BY ELECON ENGINEERING COMPANY LIMITED ROLL STAND OF SIZE MW 355 J IS AN INNOVATIVE VENTURE. THIS CAN BE DEVELOPED IN VARIOUS SIZES AS PER THE REQUIREMNT OF THE CLIENT. THE TOOTHED COUPLING, ON LEFT TOP, RECEIVES POWER AND DRIVES THREE ROLLS THROUGH TRIO OF SPIRAL BEVEL GEARS MESHING TO EACH OTHER. TOOTH PROFILE OF SPIRAL BEVEL GEARS IS CYCLOPALLOID, GEARS ARE MADE FROM HIGH TENSILE STEEL EN-40B AS PER BS: 970 ACCURATELY GENERATED AND NITRIDED. THE SHAFTS ARE AT 120( TO EACH OTHER AND SUPPORTED IN ANTIFRICTION ROLLER BEARINGS OF ADEQUATE SIZE TO TAKE CARE OF RADIAL AND AXIAL LOADS PERMITTING LARGE DEGREE OF FREEDOM AGAINST MISALIGNMENT. THE ROLLERS MADE OF CAST STEEL ARE PROOF MACHINED BEFORE ASSEMBLY AND ARE FINISH MACHINED ON SPECIAL PURPOSE BORING MACHINE FOR GIVEN SIZE OF OUTSIDE DIA OF TUBE WHEN ROLLERS ARE ALSO ROTATED AROUND THEIR AXES. THE ROLL STAND’S GEARS BEARINGS ARE GREASE LUBRICATED RESULTING SMOOTH AND TROUBLE FREE OPERATION.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Motors, Gears & Drives
|
| | | |
|
