|
|
Machine, Tools & Components
|
Suppliers Directory
|
MEASURE TEST CORPORATION
Manufacturer & Exporter Of Airborne Particle Counter.
| | Address : |
53A, MEHERINA, NEPEAN SEA ROAD, |
| Telephone : |
+(91)-(22)-3645282 |
| Fax : |
+(91)-(22)-3692993 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
GAS MASK LEAK TESTER - TDA 9 - MEASURE TEST CORPORATION PRESENTS A PROTECTIVE GAS MASK LEAK TESTER, MODEL TDA 99M FROM ATI, USA. THIS REFORMER PIECE OF EQUIPMENT IS THE ONLY PORTABLE DEVICE AVAILABLE, WHICH WILL PROVIDE LEAKAGE TESTING OF SPECIFIC COMPONENTS WITHOUT DEMANDING THE USER TO WEAR THE MASK. TESTS PERFORMED BY THE TDA 99M INCLUDE: OVERALL MASK LEAKAGE TEST; LEAKAGE ISOLATION TEST; OUTLET VALVE TEST;; DRINK TUBE VALVE LEAKAGE TEST; DRINK TUBE FLOW TEST DRINK TRAIN LEAK TEST; AND QUANTITATIVE FIT TEST.
|
|
LEAK TESTERS FOR AUTOMOTIVE FILTER - FOR THE AUTOMOTIVE INDUSTRY VARIOUS LEAK TESTERS ARE MANUFACTURED BY THE FAMOUS WILCO AG, SWITZERLAND. THE RANGE OF PRODUCTS TESTED INCLUDES OIL FILTERS, FUEL FILTERS, PETROL TANKS, ACTIVE CARBON FILTERS, ETC. BOTH MANUAL AND ON-LINE TESTERS ARE SUPPLIED. OF LATE, THE COMPANY MANUFACTURED A LINEAR LEAK TESTER WHICH CARRIES OUT TWO SEPARATE TESTS. IN THE FIRST TEST SEAMS OF THE FILTER ARE CHECKED WITH HIGH PRESSURE. IN THE SECOND TEST, A LEAK INSPECTION OF THE FILTER TAKES PLACE. ANOTHER VERY SOPHISTICATED TESTER CARRIES OUT THREE TESTS WITH EVERY SAMPLE: A FUNCTION TEST OF THE LEAK DETECTION PUMP, A LEAK TEST BY DIFFERENTIAL PRESSURE METHOD AND AN AIR FLOW MEASUREMENT BETWEEN FILTER OPENINGS. LEAK INDICATORS AND AN ALARM SIGNAL ARE TRIGGERED IF A FAULTY FILTER IS DETECTED. THE PHOTOGRAPH SHOWS A NEW MACHINE DEVELOPED FOR AUTOMATIC ON-LINE NON-DESTRUCTIVE TESTING OF MOTOR OIL FILTERS OF DIFFERENT SIZES. IT IS A 6 STATION TESTER WITH A CAPACITY OF 2,000 FILTERS/HOUR.
|
|
LEAK TESTING OF HEPA FILTERS - MODEL TDA - LEAK TESTER FOR HEPA FILTERS IS THE LATEST ATTRACTION FROM MEASURE TEST CORPORATION. THIS IS CARRIED OUT TO VERIFY THAT THE FILTERS ARE NOT DEFECTIVE OR DAMAGED, THAT THERE ARE NO LEAKS IN THE MOUNTING FRAME AND THE SYSTEM CONTAINS NO BY PASS OF THE FILTER AND THAT THEY HAVE BEEN INSTALLED PROPERLY, THE AEROSOL CHALLENGE TEST IS PUT TO USE TO ENSURE THEIR INTEGRITY AND EFFECTIVENESS. ATI AIR TECHNIQUES INC’S MODEL TDA 2G DIGITAL PORTABLE AEROSOL PHOTOMETER IS THE INDUSTRY STANDARD FOR ON SITE LEAK TESTING OF HEPA FILTERS AND NEGATIVE PRESSURE FILTRATION UNITS. THE MICROPROCESSOR CONTROLLED; FORWARD LIGHT SCATTERING LINEAR PHOTOMETER HAS A DIGITAL DISPLAY THAT SHOWS LEAKAGE FROM .0001% TO 100%. IT HAS 3 PRE-PROGRAMMED ALLUSION VALUES FOR DOP, PAO OR ANY OTHER AEROSOL. AN AUDIBLE ALARM SOUNDS WHEN THE ADJUSTABLE SET POINT IS EXCEEDED. THE AUTO ZERO AUTOMATICALLY ESTABLISHES ZERO WHEN SAMPLING AIRFLOW THROUGH THE INTERNAL REFERENCE ULPA. FILTER. THE AUTO 100% AUTOMATICALLY ESTABLISHES UPSTREAM CONCENTRATIONS AT 100%. THE BUILT IN VACUUM PUMP HAS A TRUE FLOW RATE OF 1 CF. SEVERAL HEPA FILTER MANUFACTURERS AND CLEAN ROOM CONTRACTORS IN INDIA INCLUDING AEOLUS, AIRTECH, CHEMPHARM, CRP GROUP, DYNA FILTERS, KLENZAIDS, PYRAMID FILTERS, ETC ARE USING THIS PHOTOMETER. AEROSOL GENERATORS ARE ALSO SUPPLIED BY ATI.
|
|
AIRBORNE PARTICLE COUNTERS - MET ONES MODEL 3313 AND MODEL 3315 AIRBORNE PARTICLE COUNTERS FROM MEASURE TEST CORPORATION. THESE MODELS GIVE A 1.0-CFM SAMPLING RATE WITH EITHER 0.3-MICRON SENSITIVITY (3313) OR 0.5-MICRON SENSITIVITY (3315) AND CAN BE OPERATED FROM EITHER AC MAINS OR BATTERIES, THE 3300 SERIES CAN RENDER CONSTANT INSPECTION OF CLEAN AREAS, MAKING A SAVING OF UP TO 2000 READINGS IN ITS MEMORY.
ALL THE SIX CHANNELS ARE DISPLAYED CONCURRENTLY ON THE FRONT PANEL DISPLAY AND HAS AN ADDITIONAL ENVIRONMENTAL SENSOR DATA, SUCH AS RELATIVE HUMIDITY, TEMPERATURE OR AIR VELOCITY. THAT’S OPTIONAL . IT ALSO FACILITATES THE OPERATOR TO REVIEW STORED RECORDS BY USING THE SCROLLABLE DISPLAY. ITS ENCLOSURES CAN BE EITHER ALUMINIUM FOR LIGHTNESS (LESS THAN 8 KG) OR STAINLESS STEEL FOR ENVIRONMENTAL AND CHEMICAL CONGENIALITY.
|
|
PORTABLE LIQUID PARTICLE COUNTER - PC 4000, A LIQUID PARTICLE COUNTER FOR HYDRAULIC AND LUBRICATING OIL, FROM MEASURE TEST CORPORATION MANUFACTURED BY HIAC ROYCO DIVISION OF PACIFIC SCIENTIFIC INSTRUMENTS, USA. P C 4000 IS VERY USEFUL FOR MANUFACTURERS OF EARTH-MOVING MACHINERY, AUTOMOTIVE INDUSTRY, FILTER TESTING, POWER STATION TURBINE OILS, ETC. IT IS PROVIDED WITH A BAR CODE WAND FOR SIMPLE SCAN , RUN OPERATION AND HAS A BUILT-IN PRINTER AND BACK LIT LCD DISPLAY. IT IS AVAILABLE IN SIZE CHANNELS OF 4, 6, 10, 14, 21, 38, 70CM THE LASER DIODE FORMS THE SOURCE OF LIGHT AND BOTH ON-LINE AND BOTTLE TALLY MODES ARE CONCEIVABLE, GIVING IMMEDIATE ON-SITE RESULTS. THE INSTRUMENT REPORTS PARTICLE COUNTS, ISO 4406, NAS 1638, ISO 11218 DEF STAN 05-4212 AS WELL AS THE NEW SAE AS4059C AND HAS A 0-5,000 PSI PRESSURE RATING.
|
|
MONITORING CONTAMINATION OF HYDRAULIC FLUIDS - 8011/80 - MEASURETEST CORPORATION OFFERS LIQUID PARTICLE COUNTERS TO MONITOR CONTAMINATION OF HYDRAULIC FLUIDS. A MAJORITY OF HYDRAULIC SYSTEM FAILURES CAN BE TRACED TO PARTICULATE CONTAMINATION IN THE FLUID. THESE FAILURES ARE THE RESULT OF ABRASIVE WEAR THAT CAUSES THE PUMPS, VALVES, CYLINDER RODS, STEERING, CLUTCH OR TRANSMISSION SYSTEMS TO FAIL. QUALITY ASSURANCE/RESEARCH AND DEVELOPMENT DEPARTMENTS OF COMPANIES MANUFACTURING TRACTORS, PLANES, EARTHMOVING EQUIPMENT, ETC, USE LIQUID PARTICLE COUNTERS TO MONITOR THE PARTICLE CONTAMINATION LEVELS IN HYDRAULIC FLUIDS AND OILS. LIQUID PARTICLE COUNTERS TYPICALLY MEASURE THE NUMBER OF PARTICLES FROM 1 MICRON TO 1 00 MICRONS AND ARE COMPOSED OF 3 PARTS, VIZ, SAMPLER, SENSOR AND COUNTER. THEY CAN BE CALIBRATED USING ACFTD (BASED ON ISO 4402) OR MTD (BASED ON ISO 11171). HIAC ROYCO OF USA MANUFACTURES VARIOUS MODELS OF PARTICLE COUNTERS TO COVER SPECIFIC NEEDS OF THE FLUID POWER INDUSTRY. MODEL 8011 IS DESIGNED TO ANALYSE SAMPLES OF HYDRAULIC FLUIDS, SOLVENTS AND AQUEOUS SOLUTIONS UP TO 80 CS VISCOSITY. MODEL 8012 HIGH VISCOSITY SYSTEM IS MEANT FOR SAMPLES OF GEAR COMPARTMENT, TRANSMISSION AND DARK VISCOUS FLUIDS UP TO 1800-CS VISCOSITY. AS PART OF THEIR SERVICE TO RESEARCH AND INDUSTRY, HIAC ROYCO HAVE COMPILED A SERIES OF APPLICATION NOTES WHICH CAN BE SENT FREE ON REQUEST, INCLUDING: SCHEDULED OIL SAMPLING PROCEDURES, CONTAMINATION MONITORING IN THE HYDRAULIC INDUSTRY, A MODERN REVIEW OF FIELD CONTAMINATION LEVELS, PREVENTIVE MAINTENANCE IN HYDRAULIC AND LUBRICATING SYSTEMS, AND PRODUCTION LINE TESTING OF HYDRAULIC FLUIDS.
|
|
PARTICLE COUNTER FOR CLEAN ROOMS - MODEL 23 - THIS IS A SPECIAL MULTI-POINT AIRBORNE PARTICLE COUNTING SYSTEM FOR PHARMACEUTICAL AND ELECTRONICS INDUSTRY DEVELOPED BY MET ONE DIVISION OF PACIFIC SCIENTIFIC INSTRUMENTS, U.S.A, IT IS IDEALLY SUITED FOR CLEAN ROOMS OF CLASS 100 TO CLASS 100,000 AND ITS FACILITY MONITORING SYSTEM ENSURES CONSTANT MONITORING OF LOCATIONS WHICH CAN BE EVEN 1,500 METRES AWAY. ITS MODEL 237 D REMOTE PARTICLE COUNTER COMES ENCOMPASSED IN A WATERTIGHT STAINLESS STEEL ENCLOSURE THAT USES A STANDARD LED READ- OUT AND INCLUDES FLOW LOSS DETECTION TO PROVIDE AN ALERT FOR THE LOSS OF CENTRAL VACUUM AND VACUUM FLOW CONTROL SOLENOIDS TO PERMIT COMPUTER CONTROL OF SAMPLE FLOW. THESE REMOTE COUNTERS ARE AVAILABLE WITH FLOW RATES OF EITHER 1 CFM OR 0.1 CFM ARID SENSITIVITIES OF 0.1, 0.3 OR 0.5 MICRON AND COME WITH SENSORS FOR AIR VELOCITY, RELATIVE HUMIDITY, TEMPERATURE AND DIFFERENTIAL PRESSURE HELP PROVIDE A COMPLETE PICTURE OF THE STATUS OF THE CLEAN ROOM. ITS DATA IS FED TO A COMPUTER AND THE PARTICLE VISION SOFTWARE DISPLAYS THE CURRENT STATUS OF ALL MONITORED AREAS AND INSTIGATES A VISUAL AND AUDIBLE ALARM IF PRE-SET ALARM LEVELS ARE EXCEEDED. THE COMPANY HAS ALREADY SUPPLIED 200 STAND-ALONE AIRBORNE PARTICLE COUNTERS TO LEADING PHARMA COMPANIES, ELECTRONICS AND RELATED FIELDS.
|
|
PARTICLE COUNTER FOR CONTAMINATION MONITORING OF PHARMA & HYDRAULIC FLUID - MET ONE PRESENTS A BRAND NEW MODEL OF AN AUTOMATIC LIQUID PARTICLE COUNTER FOR MEASURING IMPURITY IN FLUIDS USED IN THE HYDRAULIC, PHARMACEUTICAL AND ELECTRONICS INDUSTRIES. THE SYSTEM IS AVAILABLE BOTH IN BATCH SAMPLING AND ON-LINE CONFIGURATIONS. THE ABS 2500 AUTOMATIC BATCH SAMPLER IS CONTROLLED BY THE COMPUTER AND IS COHERENCE INDEPENDENT. THE SYSTEM'S SOFTWARE DISPLAYS AND PRINTS INCREASING, DIFFERENTIAL AND AVERAGE COUNTS PER ML. RESULTS ARE DISPLAYED IN GRAPHIC (LINE GRAPHS, BAR CHARTS, TABLES) AND NUMERIC FORMATS. LIGHT BLOCKING AND LIGHT SCATTERING SENSORS ARE AVAILABLE WITH RANGES FROM 0.5 TO 400 MICRONS. THE INSTRUMENT IS APT FOR TESTING PARTICULATE MATTER IN INJECTIONS ACCORDING TO USP 23 (788) FOR BOTH LARGE AND SMALL VOLUME INJECTIONS. IT IS ALSO USEFUL FOR TESTING HYDRAULIC FLUIDS TO MEET ISO 4406, NAS 1638 AND MILITARY STANDARDS.
|
|
AIRBORNE PARTICLE COUNTER - MODEL 2 - WEIGHING ONLY 1 KG AND FITTING SNUGLY IN THE PALM OF HAND, MODEL 227 AIRBORNE PARTICLE COUNTER FROM MET ONE,USA, OFFERS A LOW COST SOLUTION FOR MONITORING CLEAN ROOMS. IT IS A USEFUL ADDITION TO THE RANGE OF DUST MONITORS FROM MET ONE, 150 OF WHICH ARE CURRENTLY BEING USED IN INDIA. THIS LASERBASED INSTRUMENT IS AVAILABLE IN 2 SENSITIVITIES, VIZ, 0.3 AND 0.5 MICRON, AND SIMULTANEOUSLY DISPLAYS 2 SIZES ON THE LCD SCREEN. SAMPLE TIME AND HOLD TIME CAN BE SET FROM 1 SECOND TO 24 HOURS. IT HAS AUDIBLE AND VISUAL ALARMS WHEN THE COUNT LIMIT IS EXCEEDED. COUNT DATA ARE STORED IN THE MEMORY FOR EASY TRANSFER TO A PRINTER OR COMPUTER. MODEL 227 HAS SEVERAL COUNTING MODES FOR QUICK ANALYSIS OF CLEANROOM CONDITIONS. BESIDES MANUAL AND AUTOMATIC, CONCENTRATION AND AVERAGE MODES ARE POSSIBLE. THE BEEP MODE IS USEFUL FOR LOCATING LEAKS IN HEPA FILTERS. IT HAS AN INTERNAL RECHARGEABLE NI-CAD BATTERY AND IS IDEALLY SUITED FOR MONITORING DUST IN THE PHARMACEUTICAL, ELECTRONIC AND FOOD PROCESSING INDUSTRIES, BESIDES BEING A BOON FOR HEPA FILTER MANUFACTURERS AND CLEANROOM CONTRACTORS.
|
|
PARTICLE COUNTER - MOST AIRBORNE CONTAMINANTS THAT COULD AFFECT A PAINTED SURFACE, ARE NOT VISIBLE TO THE NAKED EYE UNTIL THEY SETTLE ON THAT SURFACE, A COSTLY CONTAMINATION THAT CAN BE AVOIDED. AIRBORNE PARTICLE COUNTERS ARE USED TO DETECT SMALL PARTICLES AND LOCATE THEIR SOURCE. KNOWING THE EXACT SOURCE OF CONTAMINANTS MAKES CONTROLLING THEM EASIER. A LASER PARTICLE COUNTER, COUNTS AIRBORNE PARTICLES AND DISPLAYS THE RESULTS IN COUNTS FOR EACH SIZE RANGE SPECIFIED. BASED ON THE INPUT RECEIVED FROM THE MAJOR AUTOMOBILE PAINT BOOTH COMPANIES, IT APPEARS THAT THE 10 MICRONS SIZE RANGE IS VISIBLY NOTICEABLE, AND THEREFORE, MET ONE, USA, HAS DEVELOPED SPECIAL SIZE RANGES FOR ITS PARTICLE COUNTERS, TO ACCOMMODATE THE PAINT BOOTH INDUSTRY. THE MOST POPULAR MODEL (ILLUSTRATED) HAS 4 SIZE RANGES OF 0.5, 1, 5 AND 10 MICRONS AND IS BEING USED BY GENERAL MOTORS, FORD MOTOR COMPANY, HONDA MOTORCYCLE, AND HARLEY DAVIDSON.
|
|
AIRBORNE PARTICLE COUNTER - MEASURE TEST CORPORATION PRESENTS MET ONE’S MODEL 3313 AND MODEL 3315 AIRBORNE PARTICLE COUNTERS FROM PACIFIC SCIENTIFIC INSTRUMENTS, UNITED STATES. THESE DELIVER A 1.0 CFM SAMPLING RATE WITH EITHER 0.3-MICRON SENSITIVITY (3313) OR 0.5-MICRON SENSITIVITY (3315). OPERATING FROM EITHER AC MAINS OR BATTERIES, THE 3300 SERIES CAN CATER CONTINUOUS MONITORING OF CLEAN AREAS, STORING UP TO 2000 READINGS IN ITS MEMORY BUFFER. THE STORED DATA CAN BE REVIEWED ON THE FRONT PANEL, PRINTED, OR DOWNLOADED TO A COMPUTER. THE BUILT-IN PRINTER IS STANDARD. ALL SIX CHANNELS ARE DISPLAYED AT THE SAME TIME ON THE FRONT PANEL DISPLAY, PLUS OPTIONAL ENVIRONMENTAL SENSOR DATA, SUCH AS RELATIVE HUMIDITY, TEMPERATURE OR AIR VELOCITY. ALARMS CAN BE SET FOR ALL MEASUREMENTS. THE OPERATOR CAN REVIEW STORED RECORDS BY USING THE SCROLLABLE DISPLAY. BOTH ISO 14644-1 AND FEDERAL STANDARD 209E CALCULATION MODES ARE INCLUDED, ALLOWING STORED DATA TO BE ANALYSED TO EITHER STANDARD. THE ENCLOSURES CAN BE EITHER ALUMINIUM FOR LIGHTNESS (LESS THAN 8 KG) OR STAINLESS STEEL FOR ENVIRONMENTAL AND CHEMICAL COMPATIBILITY.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Motors, Gears & Drives
|
| | | |
|
