|
|
Machine, Tools & Components
|
Suppliers Directory
|
DEE TEE INDUSTRIES LTD.
Specialised Tooling For Tube Mills , Cold Rolling Mills , Steel Services , Sheet Metal Working
| | Address : |
28/33 , POLOGROUND INDL. ESTATE, - |
| Telephone : |
91-731-422101 |
| Fax : |
91-731-422108 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
SLITTING LINE TOOLING - DEE TEE INDUSTRIES LTD INTRODUCES SPECTACULARS RANGE OF SLITTING LINE TOOLINGS IN CONFERMITY WITH INTERNATIONAL STANDARDS. THESE INCLUDE ROTARY SLITTING KNIVES, METAL SLITTING KNIVES, SPACES, OVER-ARM SEPARATOR DISCS AND OTHER PRECISION TOOLS. THEY ARE MADE FROM FINEST ALLOY STEEL, HEAT-TREATED TO CLOSE TOLERANCES AND PRECISION GROUND TO PERFECT SQUARENESS. THE SLITTIN LINE TOOLINGS ARE ALSO MADE AVAILABLE IN THREE GRADES OF TOLERANCES, IE. STANDARD PRECISION AND EXTRA PRECISION, TOGETHER WITH STANDARD FOR SLITTING STRIP ABOVE 1 MM THICKNESS AND EXTRA PRECISION GRADE FOR FOILS UP TO 2 MM THICKNESS.
|
|
PLATE BENDING ROLLS - METFAB MACHINES (INDIA) PVT LTD PRESENTS FULLY HYDRAULIC DOUBLE PINCH 3-ROLL PLATE BENDING ROLLS THAT ARE SUITABLE FOR ROLLING PLATES OF 6 TO 150 MM THICK AND 2000 TO 6000 MM WIDE. BOTH ENDS OF THE PLATES, CAN BE PRE-BENT AND ROLLED WITHOUT REMOVING AND TURNING OVER OF PLATES UNLIKE IN THE CASE OF PYRAMID AND INITIAL PINCH-TYPE MACHINES. ALL THREE ROLLS ARE DRIVEN INDEPENDENTLY BY DIRECT MOUNTED HYDRAULIC MOTOR-SPEED REDUCERS GIVING OPTIMUM POWER DISTRIBUTION. RIGID STRUCTURE COUPLED WITH POWERFUL HYDRAULIC DRIVE GIVES BEST BENDING RESULTS WITH MINIMUM FLAT ENDS AND GOOD ROLLING QUALITY. ELECTRONIC MICROPROCESSOR CONTROLLED HYDRAULIC ROLLS PARALLELISM OFFERS MAXIMUM RELIABILITY, ACCURACY WITH LEAST MAINTENANCE. ALL ELECTRONIC CONTROLS ARE HOUSED ON WHEEL MOUNTED MOVEABLE OPERATOR CONSOLE ENABLING DIRECT CONTROL OF OPERATIONS AND CAN BE EASILY INCLINED FOR CONICAL BENDING AND READJUSTED INDEPENDENTLY TO RESET ROLLS PARALLELISM ELECTRONICALLY DIRECTLY FROM CONSOLE.
|
|
FRICTION SAWS - DEE TEE INDUSTRIES LTD PRESENTS SAWS MADE FROM IMPORTED CHROMEVANADIUM STEEL. THESE SAWS ARE WEAR AND SHOCK- RESISTANT AT HIGH CUTTING SPEEDS. TOOTH PROFILES ARE GENERATED FROM VOLLMER MACHINE OF GERMANY. THE FRICTION SAWS OF OD 450, 510, 600, 710 AND BORE 35 MM ARE AVAILABLE OFF-THE SHELF.
|
|
FLAT KNIVES, SPECIALISED - FLAT KNIVES FROM DEE TEE INDUSTRIES' TOOLING DIVISION COVER A WIDE RANGE. THEY INCLUDE CROP SHEARS, BAR SHEARS, BOW TIE SHEAR BLADES, SCRAP CHOPPERS, CHIPPER KNIVES (BED AND FLY), WEARING PLATES, COLD SHEAR BLADES, HOT SHEAR BLADES, ETC. THIS COMPANY ALSO MANUFACTURES FRICTION SAWS, TUBE CUT OFF KNIVES AND SLITTING LINE TOOLING.
|
|
SHEAR BLADES - THIS BLADES ARE OFFERED BY INDUSTRIES FOR SHEARING MACHINE MANUFACTURERS AND USERS, MADE FROM BEST QUALITY TESTED ALLOY STEEL. TYPES OF SHEAR BLADES ARE: CROP SHEARS; BAR SHEARS; FLYING SHEARS; BOW TYPE SHEAR BLADES; SCRAP CHOPPER; WEARING PLATES; TUBE CUT OFF KNIVES; CHIPPER KNIVES; HOT SHEAR BLADES; COLD SHEAR BLADES. SHEAR BLADES ARE OFFERED UP TO 2100 MM LENGTH FOR HOT AND COLD OPERATIONS AND ARE DESIGN ACCORDING TO SHEAR FOILS UPTO 0.2 MM THICKNESS AND BILLETS UPTO 100 MM. IT ALSO ENSURE, THAT THE KNIVES HARDNESS, COMPRESSION STRENGTH, WAER RESISTANCE, LONGER CUTTING EDGE LIFE, TOUGHNESS AND SHOCK RESISTANCE. RAW MATERIALS ARE SALED AISI-D3, D2, S1, H-13.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Machine, Tools & Components Products
|
| | | |
|
