|
|
Machine, Tools & Components
|
Suppliers Directory
|
KHUSHBU ENGINEERS
Manufactrures And Exporters Of Horizontal Honing Machines
| | Address : |
F 24/1, MIDC, SHIROLI, |
| Telephone : |
0230-24688592469620 |
| Fax : |
91-230-2468443 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
MAGNETIC CRACK DETECTION MACHINE - PRESENTING MAGNETIC CRACK DETECTION MACHINE TO DETECT HAIRLINE CRACKS ON ANY FERROUS MATERIAL, EG, AUTOMOBILE COMPONENTS, EARTH MOVING COMPONENTS, MACHINE TOOL COMPONENTS, FORGINGS, HEAT TREATED PARTS OR BAR MATERIAL FROM KHUSHBU ENGINEERS. IT OPERATES ON THE PRINCIPLE OF MAGNETISING THE COMPONENTS EITHER BY KEEPING SMALL COMPONENTS ON MAGNETISING BED OR BY FLEXIBLE ELECTRODES FOR BIG COMPONENTS BY APPLYING MAGNETISING INK IN A PRESCRIBED SUITABLE METHOD DEPENDING UPON THE SIZE OF THE COMPONENTS. SMALL COMPONENTS ARE IMMERSED IN THE INK WHILE FOR BIG COMPONENTS INK IS APPLIED EXTERNALLY AND THE SELECTION OF INK DEPENDS ON THE CONDITION OF THE MATERIAL I.E. FOR BLACK SURFACES FLUORESCENT INK IS USED WHILE FOR BRIGHT SURFACES BLACK INK IS SELECTED. FLUORESCENT LIGHT IS REQUIRED WHILE USING FLUORESCENT INK AND FOR BLACK INK DAYLIGHT IS SUFFICIENT, MAKING A EFFECTIVE METHOD TO DETECT FINE HAIRLINE CRACKS.
|
|
AUTO STROKING HONING MACHINE - AUTO STROKING HONING MACHINE FROM KHUSHBU ENGINEERS IS AVAILABLE FOR LARGE BATCH QUANTITIES. HERE, THE JOB STROKING IS DONE BY THE FIXTURE AND STROKING MECHANISM, RESPECTIVELY. THIS SYSTEM ELIMINATES HUMAN FATIGUE AND ERROR. WELL-BALANCED STROKING ARRANGEMENT RESULTS INTO SMOOTH HONING APPLICATION. BENEFITS AGAINST GRINDING: HIGH DIMENSIONAL AND GEOMETRICAL PRECISION WITH SMOOTH SURFACE FINISH; FASTER THAN GRINDING; HIGHER PRODUCTIVITY AT A MODERATE COST; LOWER CAPITAL INVESTMENT - HIGHER PROFITABILITY; SMALLER BORES OF DIAMETER 3 TO 10 MM, LENGTH OF 45 MM CAN BE HONED FASTER THAN GRIDNING, WITH HIGH PRECISION; EASY AND SMOOTH APPLICATION BY PEDDLE MOVEMENT; LESS SKILLED OPERATOR ALSO CAN OPERATE EASILY; AND STACKED HONING IS POSSIBLE IN AUTO STROKING HONING MACHINE. A FEW COMPONENTS MANUFACTURED ECONOMICALLY BY HONING ARE AUTOMOBILE CYLINDERS, LINERS, CON RODS, BRAKE CYLINDER, STEERING ROLLERS, GEARS, ETC.
|
|
HONING MACHINE WITH SUB-MICRON ACCURACY - HONING MACHINE FOR MICO BY KHUSHBU ENGINEERS. A TYPICAL OPERATION IS HONING DIA 4 MM BLIND BORE. THE BEAUTY OF OPERATION IS THAT IT CORRECTS THE TAPER OF 1 TO 5 MICRON TO 0.5 MICRON. ABOVE ALL, IT MAINTAINS THE PRE-HONING ACCURACIES SUCH AS BORE TO SEAT RUN OUT WHILE IT IMPROVES CYLINDRICITY, STRAIGHTNESS AND OUT OF ROUNDNESS OF THE BORE. SIMILARLY, MACHINES ARE DEVELOPED FOR PARTICULAR REQUIREMENTS IN HORIZONTAL AS WELL AS VERTICAL HONING APPLICATIONS. KHUSHBU HONING MACHINES AEE EFFECTIVELY APPLICABLE IN BORE FINISHING AND IMPROVING GEOMETARY OF VARIOUS COMPONENTS OF INTERNAL DIAMETER RANGING FROM 3 TO 75 MM. THE MACHINES DESIGN IS A FIRM COMPACT AND MODULAR. A SPECIAL BRAKING EFFECT TO SPINDLE IS OFFERED TO DECREASE CYCLE TIME. SPECIALLY DESIGNED MANDRELS ENABLE TO GET VERY HIGH PRECISION AND REPEAT ABILITY OF SIZE WITHIN 0.003-0.005 MM. SPINDLE NOSE IS FITTED WITH 4 WAY ADJUSTING CHUCK WITH MICRO CONICAL ADJUSTMENT. SPINDLE SPEEDS RANGE IS 0-1400 RPM INFINITELY CONSTANT.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
| Free Product Alert |
Receive regular
FREE alert
on new product
launches of Machine, Tools & Components Products
|
| | | |
|
